Jayco RV Owners Forum

Thread Tools Display Modes
Old 09-30-2016, 04:45 PM   #1
Senior Member
glsimms's Avatar
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,325
Repair Ideas for X23B...

Hey gang..... While out on a recent camping outing, I noticed something flapping on the left side of the camper. So I pull off to investigate and I notice the fender was loose and had pulled away from the screws holding it in place. The screws holes in the plastic has cracked and broken.

I contacted Jayco CS and of course they direct me to a dealer over an hour away. I don't want to spend a fortune on this.

What do you guys think of using something like liquid nails or some other type of adhesive?

2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
glsimms is offline   Reply With Quote
Old 09-30-2016, 06:28 PM   #2
Senior Member
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 2,956
Can you use a washer under the screw to hold it against the TT side? Then some non-leveling Dicor where the piece joins the TT siding.


2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
RedHorse1 is offline   Reply With Quote
Old 10-01-2016, 05:46 AM   #3
Join Date: Feb 2013
Posts: 45
I got home from a trip and found the one on the passenger was actually missing. Used screws one size larger to install the new one. Has held up for two years now.
Ed Brodt is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 05:35 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.