TV

[russimsland]

Hi all,
Just brought a small Vizio into my X17Z.Have a cable connected to park cable and a short cable on tv.Tried all connections with no luck.What is the proper setup??

[nbhybrid]

screw the coax from the TV to the outlet with the 12volt plug. Make sure the booster is off and your TV INPUT is set to the Coax setting...likely says TV

make sure the jumper wire is still in place as well

[russimsland]

Thanks nbhybrid,
now we're getting somewhere.At least I know the proper setup for trying to get it working.I've tried it before with no luck,but now I'm on the right track.

[namusmc65]

Originally Posted by nbhybrid

screw the coax from the TV to the outlet with the 12volt plug. Make sure the booster is off and your TV INPUT is set to the Coax setting...likely says TV

make sure the jumper wire is still in place as well

Then you need to go to your channel menu and do a channel search for cable channels. Each area you visit, you will need to do a new channel search.

[docmarrin]

Originally Posted by namusmc65

Then you need to go to your channel menu and do a channel search for cable channels. Each area you visit, you will need to do a new channel search.

We had a similar situation with our Vizio; did all that is stated here; got some channels good and some bad. We checked with the park management; they sent over a maintenance guy; changed the connector at the main electrical box; and all was GOOD! Since we moved a couple of times, we had them do this twice as the connectors are obviously getting old and "worn out!"