X19H Bunk End Canvas Replacement

[MillRiverFlyRods]

I need to purchase a new bunk end canvas for the trailer tongue end of our 2013 X19H. Need your help with some guidance.
- Can this be purchased through Jayco? If so, how? Our local dealer seems to have more questions than answers.
- Who offers these in the aftermarket?
- If you have experience doing this, who would you recommend to purchase?
Thank you in advance for your assistance.
All the best!
Bill

[KCSA75]

Originally Posted by MillRiverFlyRods

I need to purchase a new bunk end canvas for the trailer tongue end of our 2013 X19H. Need your help with some guidance.
- Can this be purchased through Jayco? If so, how? Our local dealer seems to have more questions than answers.
- Who offers these in the aftermarket?
- If you have experience doing this, who would you recommend to purchase?
Thank you in advance for your assistance.
All the best!
Bill

Check with Bear Creek Canvas, Canvas Replacement and RV Workshop.

[spottedimages]

I just did this on our 2007 19H. After much research, I decided I wanted factory direct replacements. I also had the same problem... no one knew how to help me! I worked with Sherry at RV Workshop (https://www.rvworkshop.com/contact) and she placed the order with Jayco for me. She will need your VIN number to quote it. I did both for $920 shipped. They are beautiful and were made to order. She was awesome to work with... my canvases were mid-production when COVID closed the factory. I got them the week before my first trip.

[MillRiverFlyRods]

Originally Posted by spottedimages

I just did this on our 2007 19H. After much research, I decided I wanted factory direct replacements. I also had the same problem... no one knew how to help me! I worked with Sherry at RV Workshop (https://www.rvworkshop.com/contact) and she placed the order with Jayco for me. She will need your VIN number to quote it. I did both for $920 shipped. They are beautiful and were made to order. She was awesome to work with... my canvases were mid-production when COVID closed the factory. I got them the week before my first trip.

Thanks for your assistance! I will call them Monday. Happy Camping!

[ultrarider]

Did you replace them yourself or did a dealer?

[Tunce the traveler]

Originally Posted by ultrarider

Did you replace them yourself or did a dealer?

One helpful hint is to pre-drill the plastic trim strip or you’ll split the strip either during the install or it will show up shortly afterwards. If the dealer installs them just make sure you give him these instructions because they never take the time to do it right. It’s also a good idea to place a washer on the screws for more surface area protection.