|
09-16-2019, 02:17 PM
|
#1
|
Junior Member
Join Date: Aug 2012
Posts: 1
|
Floor Problem
I have a 2009 26RKS. Its always been winterized properly and shows no water
marks inside anywhere.Everything works great.....except the vinyl flooring has
split starting at the bedroom area runs under the wall to the bath, thru the
bath under the wall to the hallway. I know when they build them they strech
the flooring down than build the walls on top.There is no glue under the flooring
so I assume the vinyl was just laid down and tacked on the side. Dealer says
"not my problem" Jayco says "to old can't help you" Anyone else have this
problem and what did you do.
|
|
|
09-16-2019, 02:25 PM
|
#2
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,073
|
Happens in cold climates and not just with JAYCO.
__________________
DISNEY LOVERS
|
|
|
09-16-2019, 04:35 PM
|
#3
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,092
|
This has been an ongoing problem, the vinyl splits in severe cold conditions. Some have replaced the vinyl with new by removing the old vinyl, laying down the new to the edge then using quarter round molding around the edges. Others have used vinyl planks, still others have used laminates, There are some threads on the subject,.try searching "vinyl floor"
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
09-18-2019, 03:27 PM
|
#4
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,720
|
Its 9 years old time to upgrade the flooring anyway... Mine started splitting this year too
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
10-19-2019, 12:28 PM
|
#5
|
Junior Member
Join Date: Aug 2018
Location: Las Vegas
Posts: 5
|
Has anyone seen Staples popping up through brand new Pinnacle with Vinyl Flooring? There are several, and one has actually broken through the flooring and created a hole.
|
|
|
10-21-2019, 12:56 PM
|
#6
|
Senior Member
Join Date: Apr 2018
Location: Natalbany Creek Campground, Amite City, LA
Posts: 3,244
|
Quote:
Originally Posted by NASAGUY
Has anyone seen Staples popping up through brand new Pinnacle with Vinyl Flooring? There are several, and one has actually broken through the flooring and created a hole.
|
I now there are a few owners that have had problems with nails popping up and it's covered under warranty.
__________________
AL & JANET KRUEBBE
2019 PINNACLE 37RLWS
2018 NORTH POINT 315RLTS (TRADED)
2017 RAM 3500 DRW DIESEL/AISIN 4.10 AIR BAGS
B&W COMPANION TURN OVER BALL HITCH
Formerly from Sequim, WA
|
|
|
10-21-2019, 02:04 PM
|
#7
|
Junior Member
Join Date: Aug 2018
Location: Las Vegas
Posts: 5
|
Solution to nails popping up through flooring
Quote:
Originally Posted by AKRUEBBE
I now there are a few owners that have had problems with nails popping up and it's covered under warranty.
|
Thank you. Do you by chance know how they fix it? Or anyone with the same issue. Jayco has been unresponsive. Thanks.
|
|
|
02-08-2020, 08:18 PM
|
#8
|
Senior Member
Join Date: May 2018
Location: Memphis
Posts: 355
|
11yo, small space, easy DIY, OR NOT EXPENSIVE IF HIRED; (I WUD TALK w/ flooring co vs rv shop?)
|
|
|
02-09-2020, 08:08 AM
|
#9
|
Senior Member
Join Date: Aug 2017
Location: Kingston
Posts: 1,210
|
Vinyl Flooring specialist will come to you. Providing your not to far. Call the dealer or RV service center and ask who they use. These flooring guys are wise, so use them.
__________________
Don & Donna Stout
E-9 Anchor Clanker
Full timers since 2010
2017 North Point 381 DLQS
2015 F-250 6.7 w/Timbrens
|
|
|
02-09-2020, 09:11 AM
|
#10
|
Senior Member
Join Date: Nov 2016
Location: Port Huron, Mi
Posts: 1,737
|
Back in 13 I had an 04 Montana Mountaineer. That winter it got so cold the floor split from one end to the other. Spring time came and I used a sharp utility knife and cut the old floor out and laid down a peel and stick type flooring. It was a tongue and groove around the edges as well. I got it from HD and it worked very well. I used corner round around the base of the cabinets and walls. Where the carpet met the floor, I pulled up the edge of the carpet, ran the floor to it and refolded the carpet edge to it.
__________________
2017 North Point 375BHFS
2015 Silverado 3500HD Crew Dually Dmax 4x4
|
|
|
02-09-2020, 11:07 AM
|
#11
|
Senior Member
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 1,958
|
I redid my flooring last year. Did not remove the old vinyl. Used a thicker floating vinyl interlock to cover imperfections (still pretty lightweight, added about 40# to the GTW). I removed the dinette and sofa, and lifted the front edge of the kitchen cabinets to slide the floor under. Pretty easy really, they don't use a ton of screws to hold it all together. In the end, there were only a couple of places where I needed quarter round to hide the flooring edge.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2018 Nissan Titan Midnight Ed.
|
|
|
02-11-2020, 01:56 PM
|
#12
|
Senior Member
Join Date: Sep 2017
Location: midwest
Posts: 1,211
|
i put in the planks but just used silicone for the edges..color matching looks awesome.. and no 1/4 round...
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|