Jayco RV Owners Forum
 



Reply
 
Thread Tools Display Modes
 
Old 07-22-2018, 06:36 PM   #31
Member
 
lbyeary's Avatar
 
Join Date: Mar 2018
Location: Danville
Posts: 35
Sorry, I misread the question regarding the cover. I removed both the small vent cover and the larger heater cover. Once you get the large cover off there is plenty of room to work.
Our RV sits most of the time from May - Aug and we use it in the fall-winter-spring. I was not going to wait until Sept on the dealer to check it and tell us we were fine.
I was never very mechanical but having an RV means you learn to DIY or spend big bucks. It has been fun to learn how many things I can actually do on my own.
__________________

lbyeary is offline   Reply With Quote
Old 07-22-2018, 06:59 PM   #32
Member
 
Join Date: Mar 2015
Location: Atlanta
Posts: 89
Thanks. I'll be checking mine out in few days. Rather DYI than take in when I can. Always takes too long and I trust my work over a shop any day.

You're definitely right about becoming a DYI'r if you have an RV..
__________________

__________________
2018 Jayco Greyhawk 31FS
mini4mw is offline   Reply With Quote
Old 07-23-2018, 08:24 PM   #33
Senior Member
 
Join Date: Oct 2017
Location: DFW
Posts: 145
Got the same letter. Just want to make sure, the concern is only that the wires are out of the way and not touching the exhaust?
__________________
David & Beth Fitzpatrick. Witten our 3yr Golden Retreiver.
2018 Jayco Whitehawk 23MRB
2010 GMC Sierra 1500, 150,000 miles
Smurf is offline   Reply With Quote
Old 07-24-2018, 06:17 AM   #34
Senior Member
 
Join Date: Aug 2016
Location: Middle, TN
Posts: 784
Quote:
Originally Posted by Smurf View Post
Got the same letter. Just want to make sure, the concern is only that the wires are out of the way and not touching the exhaust?
Yes that's what I understood.
__________________
2017 Hummingbird 17RK Baja
2017 GMC 2500HD Denali 6.6L Duramax

https://www.jaycoowners.com/forums/f...ome-41831.html
01tundra is offline   Reply With Quote
Old 07-25-2018, 07:55 PM   #35
Member
 
Join Date: Mar 2015
Location: Atlanta
Posts: 89
Took mine apart today and the wires were not touching the exhaust, but perhaps 1/2" away. Once I started fiddling with the wires to see the best way to tie up, they were laying on the exhaust. Verified SN matched the recall. I just tied up with a few zip ties. Below are some pics. Pretty easy job, about 15 minutes. 4 screws for the metal exhaust and 6 screws for the plastic cover. No existing caulk sealant around pieces removed so none added when I put it back together.
Attached Thumbnails
one.jpg   two.jpg   three.jpg   four.jpg  
__________________
2018 Jayco Greyhawk 31FS
mini4mw is offline   Reply With Quote
Old 07-26-2018, 09:11 PM   #36
Junior Member
 
Join Date: Jul 2018
Location: Spokane
Posts: 1
Took my Entegra in for warranty and TSB...they disabled my furnace. Now waiting for them to replace entire furnace. Unbelievable process. Dometic sent wrong TSB parts today...Hoping for everything to arrive tomorrow
strabun is offline   Reply With Quote
Old 08-03-2018, 03:51 PM   #37
Junior Member
 
ArkansasFeather17's Avatar
 
Join Date: May 2017
Location: El Dorado
Posts: 21
My 2 blue wires are laying flat on the pipe and right behind that is the OK inspection stamp. This must be Atwoods first furnace brand new trailer.....There is no way the fix they sent out is going to work the instructions are backwards. Very unhappy camper trip to Colorado...............
ArkansasFeather17 is offline   Reply With Quote
Old 08-06-2018, 10:38 AM   #38
Junior Member
 
ArkansasFeather17's Avatar
 
Join Date: May 2017
Location: El Dorado
Posts: 21
__________________

ArkansasFeather17 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jacyo, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:10 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.