Well in our new to us Entegra (2019 version), the front Coleman Mach 8 is not producing heat, so I did a lot of researching and found that the reserving solenoid coil mechanism most likely was "stuck" and to slightly tap on it to loosen it up...
so now that the weather is fairly nice where we are, I decided to one, check that out and two install the two vent covers I got for our Maxxair fans.
Pulled the cover off the AC, and all looks clean, nice wiring, connections good...
but doesn't look like there is any reserving valve solenoid coil assembly on this one.... So I sent Coleman Mach a note with the model/serial# to confirm if this was. in fact supposed to be a heat pump version... and awaiting there answer.
According to the web site and the manual, it is supposed to be a heat pump...
on the back AC, I see the reversing valve/solenoid coil mounted right next to the back coils on the right side.....?? am I missing something here? Literally....