2013 X17Z Front Canvas Replacement

[Hybrid Owner]

Would anyone have instructions as to how to remove and install the front canvas on a X17Z hybrid model. Most threads that I have been able to find will tend to have it repaired under warranty at the dealership but this is not an option for me.

I expect to receive the replacement canvas shortly and any guidance would be much appreciated.

[oldmanAZ]

Welcome to the forum.


Hopefully someone will be along with some information to help.

[Scott91370]

If it is like the 19h, which I am pretty sure it is, it's pretty easy. I just did both of mine this past weekend.

Open the bunk end to get better access. Along the interior perimeter of the tent there will be between 5 and 7 screws along the left/right/top. Just under all of these then gently pull the tent away from the body starting on one of the bottom corners. You're done.

Installation will be slightly more work because you have to be a little more careful. You can start on one end or on one of the corners then press everything into place and install the screws.