Butyl Tape or Dicor Cap Sealant Non-Sag
Going to replace all old plastic pieces on outside camper sides (door grab handle, range vent, water connection, etc.) and was going to use Dicor Non-Sag Cap Sealant that was recommended by a local rv business. Was going to use the Dicor when replacing the old stuff but while removing the door grab handle and range vent I noticed these both had butyl tape around the screw hole areas. Judging by the brittle and faded plastic I think these are original pieces installed in 2001. So my question is if Jayco used butyl tape around the screws when attaching the pieces, should I use the same method or use the Dicor that was recommended?