Can't get the hot water to work!!

[Weld on]

im a first time owner I have a 2013 32 bhds and I'm having a problem trying to get hot water running I checked the water heater system and I tried the electric and gas water heating system and the light on the switch seems to be on but no hot water will come out and also I checked if the boiler was on and it' feels hot so I suggest its on but I still can't get hot water to run thru the shower or sink, anyone have any ideas or advise I should follow the help would be greatly appreciated.

[Murff]

See this thread:

http://www.jaycoowners.com/forums/f4...ter-26885.html

,,,and welcome to the forum!

Murff

[hoppers4]

Besides the winterizing valves being in the wrong place another possibility is that the outside shower faucets (both hot and cold) have been left on and then the shower head set for now flow. This could generate a path for the cold water to flow through to the hot side making for water that's not hot enough.

[oldmanAZ]

Welcome to the forum.

Just to clarify: Are you are getting water out of the 'hot' side of the faucets that is cold like the 'cold' side of the faucet?

[sask934]

There is a switch in my trailer that I have to turn on to get the water hot using electricity or propane.

Welcome to the forum!

[BCx213]

I would look and check to see if the bypass valve to your hot water heater is open which should be closed and the valve at the top and bottom of the hot water tank are open like hopper 4 posted

[sask934]

I guess I should have read the OP thread better.

It sounds like the water is not going into the water heater and the bypass values are the issue.