Changing to LED

[Standifer]

I want to convert all the interior lighting in my Eagle Premier to LED. I first want to start with the flush mount ceiling lights. The problem is, I can't figure out how to access the bulb without breaking the flush mount fixture. I've tried prying and unscrewing and nothing gives. Can anyone help before I break them. Thanks

[etex211]

They twist off, and they're pretty hard to turn. You may not be able to create enough friction between your hand and the lens, so you may need to use something to help, perhaps a piece of rubber.

[Standifer]

Thanks, That's what I was thinking but did not want to break one.

[etex211]

I found out how they were put together when one of mine fell off and landed on top of my slide going down the road. It was very difficult to twist back on. I don't think I got it on all the way, but it hasn't fallen off again....yet.

[RedHorse1]

I've replaced all bulbs in those fixtures (was 26 or 27 as I recall) and about half were really hard to remove. I used a rubber jar lid remover on the toughest. Looking at the lens, it's CCW to remove. Be persistent.