Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 05-10-2016, 09:08 PM   #1
Member
 
Join Date: Feb 2016
Location: Bradenton
Posts: 77
Checking AC tightness

So I read about AC not being tight enough coming from the factory. I was going to check ours but not sure how on the new whisper quite AC.
There is no faceplate inside the camper where AC is. So do I have to remove outside AC cover and check there?
__________________

ParrishCamper is offline   Reply With Quote
Old 07-02-2016, 10:15 AM   #2
Senior Member
 
Old skipper's Avatar
 
Join Date: Jul 2015
Location: Tucson
Posts: 475
You posted this awhile back and received no replies. In a word yes. The best way is to take the cover off and check the installation from the top. If your unit wa not installed correctly. If this is a unit under warrantee take it in not because you can't do the repair but if a water leak ever Delors you want to have established the cause was from a bad factory install. If not check the flashing and integrity of the RTV sealant.
__________________

__________________
Neil & Karol 2015 Seneca HJ
Old skipper is offline   Reply With Quote
Old 07-02-2016, 10:40 AM   #3
Senior Member
 
Grumpy's Avatar
 
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 5,041
If you have a MACH 8 it is the top down mount. Once you remove the outside cover you also need to remove the cover (grey) over the evaporator to get to the lag screws holding it to the roof. Doubt very much it is loose since the ones in question have been the ones with the standard inside mounting bolts.
__________________
DISNEY LOVERS
PINNACLE 2015 38FLSA. aka: "Roam Sweet Home"
Grumpy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.