Furnace not firing...

[shellbell11]

I have a 2014 Eagle Premier 37bhfs..heat was working fine. When I turn the thermostat on the blowers are going fine but the furnace is not firing. Full propane tanks, checked fuses, water heater is firing fine..I am at a loss! Any advice would be appreciated

[ALJO]

If you have a thermostat with a on/off switch turn to off then on and retry

[shellbell11]

I did try that. As well as the actual on/off switch to the furnace itself, which is a pain to get at. Checked for any nests, unhooked the propane. It worked fine then, nothing!

[godawgs]

Bleed the lines on your stove until they light.

[eldermike]

Do you hear a clicking sound when the blower starts up?

[Jeff61]

If you don't hear the igniter firing, could be a board. If you can see the furnace, you may be able to notice a flashing light on it. Turn t-stat all the way down shut off furnace for 5min . Retry it. If it lights for 30 seconds and quits could be igniter. Igniter not only sparks and lights the flame but also sends a feedback signal to the board telling it theres fire. Sounds weird but that's was my experience. Furnaces should not be worked on when children or religious wives are present due to the number and variety of expletives you will go through! I had to pull the kitchen sink to get the furnace out.

[shellbell11]

No it's starts up just fine..so weird

[shellbell11]

Thank u Jeff61.. I am have the hubby attempt when he gets home!