Help to identify mystery parts

[mabelj]

We are new owners of a 2009 Jay feather exp 19h. Found this in the drawer. What are they for?

Sent from my SM-N900W8 using Tapatalk

[Grumpy]

The little brass hook is to unlock the bathroom door after the kiddos lock themselves in. Can't see the rest very clearly.

[stateboy]

I would agree with Grumpy and suggest the rest are also door knob hardware associated. We have the same brass key we use in our house when our children lock a door to a room they may or may not occupy at the time.

Sent from my SM-N910V using Tapatalk

[mabelj]

Originally Posted by 36fire412

I would agree with Grumpy and suggest the rest are also door knob hardware associated. We have the same brass key we use in our house when our children lock a door to a room they may or may not occupy at the time.

Sent from my SM-N910V using Tapatalk

At left is what was in the envelope. Something related to a recall??? The black thingy is flexible plastic says Camco on it.



Sent from my SM-N900W8 using Tapatalk

[stateboy]

Boy, those parts look familiar. I can't place them though. I went to the Camco.com site to try to ID them but to no avail. The brass key is to open a locked door from the outside hole in the middle of the knob as stated before. Hopefully, Grumpy or someone else will chime in.

Sent from my SM-N910V using Tapatalk

[oldmanAZ]

I believe the part that says 'Camco' is a device to operate the screen door latch. Our screen door is different so I can't provide a photo.

The 4 'spring screws' in the lower left were probably removed and replaced with the screws in the package.

[Explorer03]

OldmanAz, you are correct. The black thing can be mounted on the screen door slide panel to operate the latch. After drilling a hole, the grommet fits into the hole and the arm slides through just far enough to operate the latch by pushing up on the flat end.

[mabelj]

Originally Posted by Explorer03

OldmanAz, you are correct. The black thing can be mounted on the screen door slide panel to operate the latch. After drilling a hole, the grommet fits into the hole and the arm slides through just far enough to operate the latch by pushing up on the flat end.

Cool. Yes there is a hole in the sliding panel there with a rubber patch covering it.

Sent from my SM-N900W8 using Tapatalk

[SkyBound]

That black screen door latch mod is one of the best ones I've done! Don't know why the previous owners took it off.

[northwindone]

Here is a picture of the screen door thing installed. Works great btw!

[sfran]

The spring screws look like they came from the inside cover of my Coleman AC unit.