|
|
08-21-2016, 01:56 PM
|
#1
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
Installed Coleman digital thermostat.
So today I finally got around to installing my new digital thermostat I bought a few weeks ago. Easy wire for wire install. It is working great. Now I actually know the accurate temp in my rig. I'd guess the original slide thermostat was 6-8 degrees off.
Great mod IMO!
Sent from my iPhone using Tapatalk
__________________
2016 Jay Flight 38FDDS
|
|
|
08-21-2016, 04:28 PM
|
#2
|
Member
Join Date: May 2016
Location: Manchester
Posts: 32
|
I haven't done any research yet, but I'm guessing you cannot use a digital household thermostat. I looked that one up and I see it says 12 V.
__________________
2011 Jayco Jayflight 26 RLS
2019 Jayco Jayflight 28 BHS
2007 Tundra 5.7 4x4 TRD SR5 D/C
2019 Tundra 5.7 4x4 SR5 D/C
From the great Granite State
|
|
|
08-21-2016, 04:30 PM
|
#3
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Quote:
Originally Posted by Bigmoo315
I haven't done any research yet, but I'm guessing you cannot use a digital household thermostat. I looked that one up and I see it says 12 V.
|
Correct, there are some that have an internal battery that some are using but the wire for wire swap is the easy way for me.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-21-2016, 04:34 PM
|
#4
|
Member
Join Date: May 2016
Location: Manchester
Posts: 32
|
Quote:
Originally Posted by norty1
Correct, there are some that have an internal battery that some are using but the wire for wire swap is the easy way for me.
|
Thanks
__________________
2011 Jayco Jayflight 26 RLS
2019 Jayco Jayflight 28 BHS
2007 Tundra 5.7 4x4 TRD SR5 D/C
2019 Tundra 5.7 4x4 SR5 D/C
From the great Granite State
|
|
|
08-21-2016, 04:47 PM
|
#5
|
Senior Member
Join Date: May 2013
Posts: 1,588
|
The only thing holding me back from doing this mod is the inability to run the fan only, constantly. By the looks of things you have to have it on either heat or cool mode for the ran to run. I suppose you could put it to "cool" and then dial the temp way up with the fan on "on" mode and that would achieve the same thing as the fan on only?
__________________
2013 F-150 EcoBoost MaxTow, Roush tuned (415hp 506tq), lifted on 33s, R.A.S.
2013 Jay Flight 28BHS Elite (Equalizer 10K hitch)
|
|
|
08-21-2016, 05:38 PM
|
#6
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Quote:
Originally Posted by SkyBound
The only thing holding me back from doing this mod is the inability to run the fan only, constantly. By the looks of things you have to have it on either heat or cool mode for the ran to run. I suppose you could put it to "cool" and then dial the temp way up with the fan on "on" mode and that would achieve the same thing as the fan on only?
|
That would work fine if the thermostat was set way higher than the outside temp.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-21-2016, 06:28 PM
|
#7
|
Senior Member
Join Date: Apr 2016
Location: Springfield
Posts: 237
|
Quote:
Originally Posted by SkyBound
The only thing holding me back from doing this mod is the inability to run the fan only, constantly. By the looks of things you have to have it on either heat or cool mode for the ran to run. I suppose you could put it to "cool" and then dial the temp way up with the fan on "on" mode and that would achieve the same thing as the fan on only?
|
Putting the fan to On will run it without having it on Cool.
|
|
|
08-21-2016, 06:35 PM
|
#8
|
Senior Member
Join Date: Oct 2014
Location: Sparwood, BC
Posts: 2,800
|
Seems like the wall is short or the TH is to big. Someone my accidentally knock it off.
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
|
|
|
08-21-2016, 07:12 PM
|
#9
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Just noticed that also.
Sent from my iPhone using Tapatalk
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-21-2016, 07:51 PM
|
#10
|
Member
Join Date: Mar 2015
Location: Bellevue
Posts: 37
|
I installed the digital thermostat earlier this season. I need to stuff some insulation in the hole behind it so the heat/cold in the wall doesn't effect it so much....
Sent from my iPhone using Tapatalk
|
|
|
08-21-2016, 08:33 PM
|
#11
|
Junior Member
Join Date: Aug 2015
Location: Galesburg
Posts: 13
|
I also did this upgrade this year. Love it.
__________________
2013 Chevy 2500HD 4x4 Duramax/ Allison
2015 Jayco Eagle 321rsts 5th Wheel
B&W Companion Slider
|
|
|
08-21-2016, 08:49 PM
|
#12
|
Member
Join Date: Nov 2015
Location: dallas
Posts: 94
|
Where did you buy the thermostat from ? Id like to buy a digital for my TH. thanks
__________________
Previous units-2016 jayco octane sl floor plan 222,, 2016 Winnebago spider 28sc,, Current unit- 2017 keystone raptor 398ts,,, 2016 Chevy CC 3500hd dually High Country 6.6 duramax
|
|
|
08-21-2016, 09:15 PM
|
#13
|
Junior Member
Join Date: Aug 2015
Location: Galesburg
Posts: 13
|
__________________
2013 Chevy 2500HD 4x4 Duramax/ Allison
2015 Jayco Eagle 321rsts 5th Wheel
B&W Companion Slider
|
|
|
08-21-2016, 09:35 PM
|
#14
|
Member
Join Date: Mar 2015
Location: Bellevue
Posts: 37
|
RVP 8330-3862 Coleman Mach Black Digital Wall Thermostat from Amazon
Sent from my iPhone using Tapatalk
|
|
|
08-22-2016, 07:30 AM
|
#15
|
Senior Member
Join Date: Oct 2015
Location: Worcester
Posts: 1,428
|
Quote:
Originally Posted by ALJO
Seems like the wall is short or the TH is to big. Someone my accidentally knock it off.
|
It's a little bigger than the analog one I replaced. It does hang over just a bit. Less than 1/2 inch. I think it'll be ok. I got it from Makarios RV. Lowest price around.
__________________
2016 Jay Flight 38FDDS
|
|
|
08-22-2016, 08:19 PM
|
#16
|
Member
Join Date: Nov 2015
Location: dallas
Posts: 94
|
Ordered one today. I gave the man the RVP # on the back of old unit and he said its shipping tomorrow. In the hole behind thermostat is it good just to stuff a piece on insulation in there just to help it out ? I could not believe how just 2 screws hold this thermostat on the thin wall. I guess I was thinking house structure quality, lol. Its all Good
__________________
Previous units-2016 jayco octane sl floor plan 222,, 2016 Winnebago spider 28sc,, Current unit- 2017 keystone raptor 398ts,,, 2016 Chevy CC 3500hd dually High Country 6.6 duramax
|
|
|
08-22-2016, 08:34 PM
|
#17
|
Member
Join Date: Mar 2015
Location: Bellevue
Posts: 37
|
Quote:
Originally Posted by rcmike
Ordered one today. I gave the man the RVP # on the back of old unit and he said its shipping tomorrow. In the hole behind thermostat is it good just to stuff a piece on insulation in there just to help it out ? I could not believe how just 2 screws hold this thermostat on the thin wall. I guess I was thinking house structure quality, lol. Its all Good
|
Not a lot of insulation in the walls. I can feel the heat in the hole where the wires come out.
Sent from my iPhone using Tapatalk
|
|
|
08-23-2016, 04:58 AM
|
#18
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Any thermostat will work better/accurate if you keep any outside influences away. I stuffed insulation in the hole then put some tape over that as I installed it.
Another thing is the location. One of mine is near the main door so every time someone opens it, it is so precise that it will react.
Also be aware where your cold vents are pointed. A ceiling vent blowing towards the thermostat can cause it to appear inaccurate.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-23-2016, 07:27 AM
|
#19
|
Member
Join Date: Nov 2015
Location: dallas
Posts: 94
|
Thanks
__________________
Previous units-2016 jayco octane sl floor plan 222,, 2016 Winnebago spider 28sc,, Current unit- 2017 keystone raptor 398ts,,, 2016 Chevy CC 3500hd dually High Country 6.6 duramax
|
|
|
08-23-2016, 08:33 AM
|
#20
|
Member
Join Date: Jun 2016
Location: Versailles
Posts: 89
|
Quote:
Originally Posted by norty1
Any thermostat will work better/accurate if you keep any outside influences away. I stuffed insulation in the hole then put some tape over that as I installed it.
Another thing is the location. One of mine is near the main door so every time someone opens it, it is so precise that it will react.
Also be aware where your cold vents are pointed. A ceiling vent blowing towards the thermostat can cause it to appear inaccurate.
|
Mine is next to the door and i did this install. How did everyone connect wires. Wire nuts?
Also, should i pull off wall and stuff some insulation of some sort in hole? will it make a diff?
__________________
Maestro
--------------------------------------
"Life is better in my RV"
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|