Replacing the Outside Cable TV Port

[RedHorse1]

I’ve found a nice replacement from Furion but the mounting flange is smaller than the original and won’t cover the original screw holes. I’m thinking a piece of plastic to cover the original mounting site with a hole to mount the new one. A plastic (PVC) cover for a gang box might work but seems thicker than I need and would need painting. Can any of you clever folks suggest an alternative? It’d need to be UV resistant and probably paintable unless I can find something black or brown.

[TCNashville]

Red, is this one too small? I replaced my older style cable inlet with this one.
https://www.amazon.com/JR-Products-0...motive&sr=1-10

[RedHorse1]

Originally Posted by TCNashville

Red, is this one too small? I replaced my older style cable inlet with this one.
https://www.amazon.com/JR-Products-0...motive&sr=1-10

TCN, that might work. Didn’t see that one when I was shopping for a new one. Will measure and see if it will do. I may have a second purpose for the Furion that I bought. Appreciate your input. Thx!

[jasum]

Originally Posted by RedHorse1

I’ve found a nice replacement from Furion but the mounting flange is smaller than the original and won’t cover the original screw holes. I’m thinking a piece of plastic to cover the original mounting site with a hole to mount the new one. A plastic (PVC) cover for a gang box might work but seems thicker than I need and would need painting. Can any of you clever folks suggest an alternative? It’d need to be UV resistant and probably paintable unless I can find something black or brown.

Aluminum