Wardrobe slide 328 RLTS
We noticed the wardrobe slide on our 2012 328 RLTS did not close tightly at the top, mainly the top left corner. It seals well at the bottom and I have adjusted the slide in and out and up and down and cannot get it any better. We use the slide lock when we travel just to keep the gasket tighter. It seems that when the slide is open, it seals better on the left inside than the right and then when closed seals better on the right than the left. I see there are no adjustments that will allow me to move (rotate) the slide left and right without slotting the mount to allow for that adjustment.
I did contact Jayco and was told the light weight of the wardrobe slide prevents it from sealing tightly at the top and that is why they include a slide lock for traveling.
Any suggestions? I may remove the slide mount and rebuild it to include up and down and left and right adjustments.
Thanks for all the great information so far from the Forum as I am new to the TT world and there is great info here.
|