|
What is that bump in the floor?
I had a screw backing out from vibration in our 2016 Jayco White Hawk 27DSRL. I cut the flooring in a circle around the screw head, leaving enough around it so I could glue it back down. The circle was to avoid a straight line that might "run" someday into a tear. I drove the screw back in and used super glue to put the little piece of flooring back in place. An easy repair that you can do yourself.
Notes: I've seen other people say to put lock-tight on the screw so it stays put. I was a little afraid of taking it all the way out just in case it wouldn't line up to put it back.
I also let it go too long and wound up with the little patch of flooring being stretched where the screw was poking up. Had I done it earlier, it would be near impossible to see my repair.
__________________
Tom & Kelli
2016 Jayco White Hawk 27DSRL
2018 GMC 3500HD Denali
Empty nesters - traded bunk beds for recliners
States camped in:
|
Linear Mode
