2015 Seneca entrance door keypad code

[Foster15]

Is there a source to learn how to change code on keyless entry? Nothing in owner's manual packages.

[TNCraig]

If it is a bauer lock (oval head on the key) go to

https://www.bauerproducts.com/

[RULazy2]

+1 to TNCraig's comment.

Another resource is the dealership. My dealer has a printout for the instructions that they include in the owner paperwork package. I would send it to you but we have different locks

[Jayrundle]

There is insturction I believe in the camper owner manual, if not take the battery door off the back there is insturction on setting the codes there

[WeylanBryant]

It's actually quite easy! Go to the Bauer website (http://bauerproducts.com/baueremmanual.php) and it will walk you through it. This is the resource that I used and it worked flawlessly! ***MAKE SURE TO CHECK THE BATTERIES***. The batteries in my new 2015 Seneca 37TS were DOA. Changed for new ones and everything worked fine!

[Albo]

I have a 2014 Seneca that I can't seem to find the instructions for the code change. It's not the Bauer. Thanks for any help in advance

2014 Seneca 37fs

[Mr.Oz]

I changed the code on our 14 Seneca. My dealer gave me a copy of the instructions. I'll look through my paperwork and see if I can find it. It was pretty easy to do.

[Mr.Oz]

I found it!
Program new access code
1. Hold 5/6 button for 5 sec (keypad beeps)
2.Enter your authority code
3. Keypad will beep until you press the button to which you want to program a code. (if you get a 3sec beep that stops you entered the wrong authority code)
4.Enter your new 5 digit access code (double beep with each button press 3 beeps at end)
5.Re-enter new access code (double beep with each button press 3 beeps at end)(if one long beep sounds training failed, start over)

[Albo]

yep that worked with mine, I took mine out and found the name on it and it is a Trymark and they have instructions on how to set a new access code and authority code on the internet

Buddy
2014 Seneca 37 FS