2018 Seneca Brake Controller

[Rustynuts]

For a 2020 Seneca I think people are finding them right above the steering column. Not sure about the plug, must be something new or a mistake

[Mike7570]

Okay, thanks for the heads up. I'll check above the steering column.
It was raining a bit too much to hang out the driver side door looking for them.
I should be able to get under there next weekend.

[EA37TS]

Originally Posted by Mike7570

Thanks to Rustynuts , I think you saved me time and from taking my dash apart. I need to find the wiring for a 2020 Seneca. I assume it’s in the same place as yours. I looked under the dash and the driver side kick panel did look like an obvious place for them.
Now Why did my box of manuals and operating instruction come with a trailer brake pig tail with the packaged labeled “Ford”? I assume they just box up the same for each of their MH’s and the majority being Ford V10’s the pigtail would be correct. (It also came with a air mattress inflator and I don’t have any air mattresses.)

The brake controller wiring connector they gave me with the Accolade is also labelled Ford.

[Mike7570]

Did it fit?

[EA37TS]

Originally Posted by Mike7570

Did it fit?

I haven't tried because I don't tow a trailer or need a brake controller. I will check it out when I go back out to the rig.

[Mike7570]

Found the wiring behind the small cover left side under dash on driver side. The wires lead to a plug that is just above the steering column. This was for a 2020 Seneca.

[SloPoke]

ahhhhh the beauty of not having anything with Electric Brakes now...

Not having to fix the thing... no more replacing magnets, No more tracing wires... no more hunting fuses and NO more dealing with Break-Away batteries!!!!!

Surge brakes for the win. (yep.. on a 10k trailer too... )

[Big J and S]

My husband is going to install a Primus to our Seneca, we have a 2017 and he made sure that the wires are there, has anyone installed a primus IQ