2021 Jayco Melbourne 24K - Transfer Switch Location

[21JaycoMelbourne24k]

Hi All,
I was browsing looking for an answer, and I think it's under the bed, however that's where the slide is. The bed slides out to the back. Anyone know the best way to access this area? I pulled the first panel up only to find plywood that the slide is sitting on top of.

Thanks in advance!

[cpd1343]

It is most likely under the bed. The slide has to be out. The plywood should have a few screws holding it in. The 24L has the slide controller, transfer switch and water tank under the bed.

[72buickgsconv]

What Year is your 24L?

[cpd1343]

Originally Posted by 72buickgsconv

what year is your 24l?

2021

[Pfflyer]

I believe I remember it being under the bed in my 2016 24k as well. As mentioned above the slide needs to be out to access.

[Ricardo8]

The transfer switch is under the forward section of the bed. There is a thin 1/8 veneer piece that needs to be removed then remove the plywood under the veneer. There are Phillips head screws holding both the veneer piece and longer ones holding the plywood.
Obviously, you must have the slide out extended to access the equipment. You will find most of your electronics inside this cavity. You may be disappointed at the lack of craftsmanship and care by the installers. Transfer switch should be on the drivers side of the coach opposite the fuse and breaker box.