29MV black water gate valve bolt head size

[AverageGuy]

I've got to replace the black water valve. Before I slide under there and find I don't have the right wrench, does anyone know what size the bolts/nuts are? It looks like a 10 mm.

Thanks,
Jim.

[435-fht]

I forget the size, but it was a metric, for my 2023 31F.

[pconroy]

Put a couple of wrenches in your pocket before you climb under. Then you'll know for sure the bolt size is the wrench that's still in your tool chest.

[CAG]

Originally Posted by AverageGuy

I've got to replace the black water valve. Before I slide under there and find I don't have the right wrench, does anyone know what size the bolts/nuts are? It looks like a 10 mm.

Thanks,
Jim.

What Conroy said. Don't go to a job with the wrong wrench.

[Jagiven]

I don't recall, but it was around 7/16, but could have been metric or sae, don't recall?

[Okie Traveler]

I just replaced the valves on my Designer, the 3 inch valve was 7/16 and the 1 1/2 inch valves were 5/16.