Greyhawk 2005, The blank tank dump handle only comes out about half way. Still dumps but would like it to go all the way out. I don't know why. Seems like a good idea. Any ideas or suggestions?
TIA
__________________
[SIGPIC]
ChuckD
From Beautiful Southern Oregon
2017Jayco Precept
towing a 2007 Honda CR-V
Greyhawk 2005, The blank tank dump handle only comes out about half way. Still dumps but would like it to go all the way out. I don't know why. Seems like a good idea. Any ideas or suggestions?
TIA
Mine kind of sticks sometimes. I usually have to work it open and closed a few times to get it opened up all the way. Seems like the seal is sticking in the valve housing to me.
__________________
Bill
2011 Dodge Ram 1500 HEMI Quad Cab
2011 Jay Flight 26BH
A little lube on the slider valve shaft generally solves this problem. Pull the valve open as far as you can, lube the shaft and work it open and closed a few times. Should help.
I had to disassemble mine and found that some of the plastic which was left over as they cut the holes was stuck in the valve seat. Fortunately this happened after dumping the tank.
__________________
________
Carl & Dawn
2015 Greyhawk 31FS (with 4x4 conversion by Ujoint Offroad)
2012 Lincoln MKZ Hybrid (our TOAD on a DEMCO Dolly)
DW, DSx2, DDx2 Catx2 Dog
Tampa Bay Area of FL
Linear Mode
