There should be a BT flush fitting in the control center, you would just hook up a separate/different hose to it, close the BT valve, turn on the water for the BT flush hose and let it run for a couple to 5 minutes (depending on the size/capacity of BT), then turn off water supply to BT, open BT valve and drain, then repeat as needed.
You should use a hose DEDICATED for the BT flush function to avoid any possibility of cross contamination in the water supply lines.
__________________
'08 Greyhawk 31SS Traded in
2018 MR2410RL
Goodyear Endurance
Equalizer WDH
TV 2018 F150 FX4 SC 3.5EB TP/MT
|