Cabin small table with cup holders

[TheOtherDodge]

I can't really title it correctly, and also could not search successfully because of that! But, I am looking for a small table with cup holders that can go between the 2 cabin seats as my seats swivel around. Can be used when driving or parked. Any suggestions or links to something like this?

[norty1]

Does this mount give you any ideas?

https://www.google.com/search?q=adju...client=gws-wiz

https://www.amazon.com/Adjustable-De.../dp/B0891QVJB2

[TheOtherDodge]

Not looking for some thing to bolt in because that would make it more difficult to go from the cabin (when the chairs are in driving position) to the coach. For the time being, we used a little table like this (https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1) which was the perfect size and height but didn't have cup holders and the wife knocked over my nectar!

[norty1]

You could easily modify that same table to add cup holders. I am sure they can be purchased on Amazon also.

[Pfflyer]

With a LAGUN table leg you will need to make your own top but it will swivel or turn out of your way. The leg can be removed completely when not in use as well.

https://www.lagunusa.com/lagun-table-system-category

I have seen this system used exactly for the purpose you describe but can’t find the pictures.

[TheOtherDodge]

Thanks everyone. I was hoping for a simple and inexpensive table similar to the one I have but with some built in cup holders. I will keep looking!

[Pfflyer]

Have you considered making one to your specs and needs. There are bamboo cutting boards most likely close to the size you need. Use a hole saw to make holes to fit cup holders like this, https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
attach it to the legs you have and your done. If you dont have hole saws if you have a plumber or electrician in the family they will. Here is an example of the top.
https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1

If you were close I have 2 of those cupholders left and the proper hole saw.

Edit; If you have that table you linked to, the cutting board I linked to is pretty close and would probably work.

[GuanoJuano]

https://www.amazon.com/Tailgate-mate...48438&sr=8-121

https://www.amazon.com/Trademark-Inn...48475&sr=8-185

https://www.amazon.com/Suyi-Ultralig...48540&sr=8-280

I did a search on Amazon for camp table cup holders and came up with these that might fit your need

[TheOtherDodge]

Lots of good help! Thanks everyone! If I can't find one, I will probably do what Pfflyer suggested by making my own with a cutting board and cup holders.

[TaftCoach]

I have a similar model to this

https://www.backcountry.com/alps-mou...caAgU4EALw_wcB

[pconroy]

I made my own. I think the cup holders were $8. The hole saw, on the other hand, was close to $40.