Quote:
Originally Posted by Grumpy
Right from their web site:
1. Locate area needing repair or sealing.
2. Clean the surface. Allow it to dry completely.
Recommended cleaners: EternaClean, Lacquer Thinner, Acetone, Denatured Alcohol,
etc. (If rusty, scrape or sand loose rust off,
then wipe off dust.)
3. Remove release liner. (See Liner Removal
Tips section.) Only remove enough liner for
the area you are working on. Keep adhesive
side clean and dry. Apply tape to surface.
4. Apply pressure to activate bonding process.
Use a steel roofer’s roller for best results. The
firmer the pressure or rubbing applied, the
faster the bond.
*NOTE: EternaBond does not stick to silicone.
https://www.eternabond.com/v/vspfile...ps_install.pdf
|
I added a Maxxair fan to my previous sport 8, I did no cleanup and used it for 2 years with no issues with initial application of dicor. Very happy with it and will use soon on the newer camper