Hi! The power step on my 2018 Greyhawk stoped working. There is power to the motor and the control box but the control box is making a constant clicking sound. Any idea if that’s a sign that the control box is bad?
Not 100% sure but I agree clicking out of the controller can't be good. I think mine is silent but since the whole step assembly makes so much noise, I guess I cannot be sure.
There is a Youtube video on how to actually test the controller. You need four wires and a 12V source. It's on my to-do list since my steps stopped working -- again.
Also not completely sure, but the clicking sound you hear may be a relay opening and closing when the stairs are wanting to go up/down. However, you did mention that the motor has 12 volts; my thinking would indicate that the 12 volts to the motor would be "bouncing" if a relay was chattering.
Power step appears to be stuck in a 180* out of sync issue. Our step goes out when I start the rig and retracts when the rig is shut off . Luckily i didn't hit anything going down the road but had to stop along the high way after a passer by notified me the steps where out. After i figured out what was going on I shut off the rig to retract the step then i unplugged the motor so i could continue down the road.
However on my return trip the steps would not work at all so i disconnected the linkage pushed hem in and tied them up with a ratchet strap to get home
Linear Mode
