EEZtire tpms system

[onsite]

Has anyone installed the EEZtire tpms system on their class C .
I purchased a 6 sensor system and had to remove the small stem extenders to fit the sensors on the rear tires. The inner tire stem was easy to get to but had to remove the security spin case from the sensor so the hub cap would fit back on.
The stem for the outside rear tire faces in So I removed the small extender as well. The only thing is when I need to put air in rear I have to remove the hubcaps. I tried to purchase some extenders to make the sensors work with rear hubs installed but could not find any.
Front tires had no issues, was able to leave the security spin case on sensors .Sensors fit OK with front hubs on.
If anyone has installed tpms this, Please post extenders parts if used and where you got them.
Thanks.

[phuggit]

Yes. I installed the same system on my Seneca. I replaced the oem valve stems with longer ones.

[Pfflyer]

I highly recommend a steel valve replacement and not to use extenders with an external TPMS system. Rubber valves will fail over time. Use a system like in the following link for an easy pressure check/fill and a stable platform for your screw on TPMS.


https://yourtireshopsupply.com/categ...lly-valve-kits