After solving my water heater problem, Shower leak. Inner dualie losing air and possibly the water pump priming issue I repositioned all the power components. I really did not like the fact that they were on the floor with the water pump and all of the plumbing.
I mounted them on 3/4" plywood that I mounted against the back wall. I also tidied up the wiring rhe best I could without shortening a lot of wires. 3 days with half my body squeezed in thru a drawer opening was enough for me.
Also, the water pump was hovering above the floor so I added a piece of 3/4" plywood under it and screwed it down