Originally Posted by Jopopsy
Push it down ... meaning you sorta 'bent' whatever is behind all the pleather and cushioning?
I want to try it, but I'm afraid I'll break it off.
No, it didn't feel like anything bent or was damaged. It felt more like it was bolted on tightly, and the bolt/nut rotated inside whatever it was bolted to (the seat frame probably).
That being said, I did try to push it further, and I pushed pretty hard, but it wouldn't move any more. Like you, I didn't really give it the "beans" because I was afraid I would break something. It's really not that bad where it is, I kind of like a higher armrest on that side anyway.
My bigger problem is the door side. The armrest molded into the door panel is too low, and I don't like riding with my elbow on the bottom of the window opening. I usually end up laying my arm across the top of the door panel up against the window. I know they make attachments for door panel armrests, but I haven't shopped those yet.
-2018 Greyhawk 29MV
-1997 Jeep Wrangler YJ (Toad)
-2015 Jeep Grand Cherokee Limited (Soon to be Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)