|
|
07-23-2018, 11:27 PM
|
#1
|
Junior Member
Join Date: Jul 2018
Location: Stevensville
Posts: 24
|
Greyhawk entry door touchpad lock
We just bought a 2014 greyhawk 31fk but don't have the combination to the entry door touchpad lock system. Does anybody know how I can get the combinatin or re-program it?
Thanks
|
|
|
07-24-2018, 01:35 AM
|
#2
|
Senior Member
Join Date: Jun 2016
Location: Denver
Posts: 4,248
|
Quote:
Originally Posted by Big Daddio
We just bought a 2014 greyhawk 31fk but don't have the combination to the entry door touchpad lock system. Does anybody know how I can get the combinatin or re-program it?
Thanks
|
Bauer made the one on our 2016.
Bauer EM - Bauer Products
__________________
2016 Greyhawk 31FK
|
|
|
07-24-2018, 08:52 AM
|
#3
|
Member
Join Date: Jul 2017
Location: Millstone Township
Posts: 32
|
For our's you just have to unscrew cover for the batteries. There should be instructions on the inside of that cover on how to reprogram. Let me know if it is there.
__________________
From the Garden State!
2017 Greyhawk 31DS
Blue OX Alpha tow bar
2002 Jeep Liberty Limited
|
|
|
07-24-2018, 09:02 AM
|
#4
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Quote:
Originally Posted by Big Daddio
We just bought a 2014 greyhawk 31fk but don't have the combination to the entry door touchpad lock system. Does anybody know how I can get the combinatin or re-program it?
Thanks
|
When you pull the batteries out, it should erase the code. There should be instructions on the inside if the battery door as to how to set or reset your combination. At least on mine there is.
|
|
|
07-24-2018, 03:13 PM
|
#5
|
Junior Member
Join Date: Jul 2017
Location: Cincinnati (HAMILTON)
Posts: 23
|
Those things are actually suppose to work?
|
|
|
07-25-2018, 07:37 AM
|
#6
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Quote:
Originally Posted by Spanks79
Those things are actually suppose to work?
|
Mine works very well. The original one that came on the coach was bad, and Jayco sent me an updated one that has been just great !! The batteries have lasted almost a year, so far, with a lot of use.
|
|
|
07-25-2018, 07:47 AM
|
#7
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,217
|
Quote:
Originally Posted by Spanks79
Those things are actually suppose to work?
|
Yup! I think I've only used my actual key once or twice. Once during the PDI for sure, and maybe another time before I had programmed it.
The only thing I don't like about it is that the buttons are "soft touch" and they're REALLY sensitive, so if you barely run a finger over them, the pad registers an input.
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
07-25-2018, 07:56 AM
|
#8
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Quote:
Originally Posted by Camper_bob
Yup! I think I've only used my actual key once or twice. Once during the PDI for sure, and maybe another time before I had programmed it.
The only thing I don't like about it is that the buttons are "soft touch" and they're REALLY sensitive, so if you barely run a finger over them, the pad registers an input.
|
That’s true, plus the only other problem I’ve had, is one time when the sun was directly on the pad for a while, in 100+ degree temp, it did not want to react to my touch. I don’t know if the pad is heat sensitive to the touch, or not, but that was the only time it didn’t want to work properly for me. I used it again later that day and all was fine. I have keys hidden away, just in case things such as this ever happen. It just surprised me when it did not want to work, after three attempts.
|
|
|
07-25-2018, 08:01 AM
|
#9
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,217
|
Quote:
Originally Posted by gprapim
That’s true, plus the only other problem I’ve had, is one time when the sun was directly on the pad for a while, in 100+ degree temp, it did not want to react to my touch. I don’t know if the pad is heat sensitive to the touch, or not, but that was the only time it didn’t want to work properly for me. I used it again later that day and all was fine. I have keys hidden away, just in case things such as this ever happen. It just surprised me when it did not want to work, after three attempts.
|
I still take my keys with me whenever we leave the camper.
I've been thinking about hiding a key somewhere on the outside as well as an ignition key somewhere on the inside. I've been known to forget my keys when I go to pick the unit up from storage. It was a bigger problem with the trailer because I was often by myself, but with the MH, DW has to come too, so at least one of us usually remembers to bring keys to the camper! LOL!!
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
07-25-2018, 08:59 AM
|
#10
|
Junior Member
Join Date: Jul 2017
Location: Cincinnati (HAMILTON)
Posts: 23
|
Interesting. I have found my keyless entry lock completely useless. I think it worked for a week after we bought the unit new. I had the dealer preform a repair under warranty and I've just never trusted it since. We just use a key or leave it unlocked. Maybe I'll try it again.
|
|
|
07-25-2018, 10:03 AM
|
#11
|
Senior Member
Join Date: Jan 2017
Location: Manchester Center
Posts: 1,519
|
I use my all the time and only used the key a couple of times. At first it did not seem to work well but adjusted the door strike plates and it now works every time.
I have key lock box mounted in my propane tank bay. This bay doesn’t have a lock on it. I keep a spare key for the truck ignition which will open the cab doors.
__________________
Paul
2018 37TS
Jeep JL
|
|
|
07-25-2018, 10:10 AM
|
#12
|
Senior Member
Join Date: Apr 2016
Location: Kingman AZ and where our Seneca is today.
Posts: 3,120
|
Ours works very well... as long as the batteries in the lock are new. Once it starts acting up, we put fresh AA's in it and it is back to working great.
Leave it with old batteries, and like anything else - it wont work that well.
__________________
Steve & Stacy with Jasper (Australian Cattle dog)
2015 Seneca 36FK
Custom 27' flatbed trailer hauling:
07 Toyota FJC & Yamaha Kodiak 400 ATV
|
|
|
07-25-2018, 04:45 PM
|
#13
|
Senior Member
Join Date: Feb 2017
Location: Kennewick
Posts: 331
|
We love our electronic locks, as noted batteries are the issue. Good quality fresh batteries make all the difference. I seem to remember the code programming was in the owners manual too....or maybe I just wrote it in the owners manual, but yes, inside the battery compartment on mine also.
__________________
2016 Jayco GreyHawk 31DS
2016 Jeep Cherokee Trailhawk Toad.
SE Washington State
|
|
|
07-25-2018, 04:59 PM
|
#14
|
Junior Member
Join Date: Jul 2018
Location: Stevensville
Posts: 24
|
Thanks all for the info. But ours does not have a battery compartment on the lock. The touchpad is half way between the handle and the bottom of the door instead of right on the lockset. It has 2 spring loaded contacts in hinge side of door and also has a small sensor similar door or window security alarm system.
|
|
|
07-25-2018, 09:29 PM
|
#15
|
Senior Member
Join Date: Mar 2018
Location: Granbury
Posts: 829
|
Quote:
Originally Posted by Big Daddio
Thanks all for the info. But ours does not have a battery compartment on the lock. The touchpad is half way between the handle and the bottom of the door instead of right on the lockset. It has 2 spring loaded contacts in hinge side of door and also has a small sensor similar door or window security alarm system.
|
Big Daddio...the newer units come with a battery operated lock. Ours works great as long as the batteries are fresh like others said.
Call Jayco...I bet they can help you.
__________________
2018 Greyhawk 29MVP
2018 Jeep 4 Door Rubicon Recon
Retired and Under New Management (See Spouse For Details)
|
|
|
07-26-2018, 08:14 AM
|
#16
|
Junior Member
Join Date: Jul 2018
Location: Stevensville
Posts: 24
|
Thanks. Will call Jayco.
|
|
|
07-26-2018, 08:25 AM
|
#17
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Greyhawk entry door touchpad lock
Quote:
Originally Posted by Big Daddio
Thanks all for the info. But ours does not have a battery compartment on the lock. The touchpad is half way between the handle and the bottom of the door instead of right on the lockset. It has 2 spring loaded contacts in hinge side of door and also has a small sensor similar door or window security alarm system.
|
This is like the one you need. Works well, but a little pricey. Just depends on what you want.
|
|
|
07-26-2018, 08:35 AM
|
#18
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,064
|
Really like not having to carry a key to access it at home. Use it all the time. Batteries last much longer if you use the expensive lithium ion batteries.
__________________
Don
|
|
|
07-26-2018, 08:44 AM
|
#19
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Quote:
Originally Posted by hoppers4
Really like not having to carry a key to access it at home. Use it all the tine. Batteries last much longer if you use the expensive lithium ion batteries.
|
I agree, but I never carry my MH keys because this is so convenient to have and use. I do keep a complete set locked away with a combo lock, so if I ever need them, they are always available. My batteries last a very long time, even with all of the use the lock gets, but for next time, I’ll try the lithium batteries, as you suggest.
|
|
|
07-26-2018, 08:57 AM
|
#20
|
Senior Member
Join Date: Mar 2015
Location: Port Orchard
Posts: 2,064
|
Quote:
Originally Posted by gprapim
I agree, but I never carry my MH keys because this is so convenient to have and use. I do keep a complete set locked away with a combo lock, so if I ever need them, they are always available.
|
X2
__________________
Don
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|