 |
|
02-18-2014, 11:30 PM
|
#1
|
|
Junior Member
Join Date: Jan 2014
Location: Escondido, CA
Posts: 10
|
Greyhawk keyless entry
Does anyone know the manufacturer of the Greyhawk keyless entry lock. We didn't get any info on how to change the five digit code. Did a search and entries seem to be for trailers. Tried the suggested procedure but no luck.
Gary
|
|
|
|
02-19-2014, 06:53 AM
|
#2
|
|
Senior Member
Join Date: Mar 2012
Location: West Michigan
Posts: 631
|
If its the Bauer one then take a look here.
http://bauerproducts.com/bauernemanual.php
__________________
If the trailers a rockin, dont bother a knockin, just come on in and make yourself a drink. We wont be long.
|
|
|
|
|
02-19-2014, 08:47 AM
|
#3
|
|
Junior Member
Join Date: Nov 2013
Location: Clemmons, North Carolina
Posts: 7
|
I just took delivery on a Greyhawk 31DS. I called Jayco Customer Service and the rep there emailed a set of directions. They will ask you for your Greyhawk Serial Number. It can be found in your delivery papers. I have not tried the directions yet, but will today.
Good Luck
Wayne G-A
WayJan
__________________
Wayne & Janis Gorlick-Asmus
North Carolina
|
|
|
|
|
02-19-2014, 11:45 AM
|
#4
|
|
Junior Member
Join Date: Oct 2012
Posts: 2
|
I changed my code on my 2013 Greyhawk 31fs. To make the change, I had to remove the keypad from the door, cut one wire and insert it into the wire harness. It was easy to do. If you need, I can dig up the specific instructions and send it to you.
|
|
|
|
|
02-19-2014, 11:48 AM
|
#5
|
|
Junior Member
Join Date: Jan 2014
Location: Escondido, CA
Posts: 10
|
Quote:
Originally Posted by Locky66
|
Thanks for the reply but not the Bauer lock.
Gary
|
|
|
|
|
02-19-2014, 11:50 AM
|
#6
|
|
Junior Member
Join Date: Jan 2014
Location: Escondido, CA
Posts: 10
|
Directions would be helpful, thanks. The keypad is below the lock and has five buttons in a row.
|
|
|
|
|
02-19-2014, 02:04 PM
|
#7
|
|
Senior Member
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
|
Might you be able to throw me the year your Greyhawk was manufactured? I can try to look it up.
John
|
|
|
|
|
02-20-2014, 05:20 PM
|
#8
|
|
Senior Member
Join Date: Apr 2012
Location: Ravalli County
Posts: 171
|
It's probably the Dexter Door system. I tried attaching the manual, but it's too large. PM me and I can email it to you.
__________________
Brian, Mary, kids, beagle - Moose, and mutt - Maggie.
2012 Greyhawk 31FS
2013 Ford Explorer Toad
|
|
|
|
|
02-20-2014, 11:19 PM
|
#9
|
|
Junior Member
Join Date: Jan 2014
Location: Escondido, CA
Posts: 10
|
Quote:
Originally Posted by bgermane
It's probably the Dexter Door system. I tried attaching the manual, but it's too large. PM me and I can email it to you.
|
Ok please do... It's a 2014.
|
|
|
|
|
02-21-2014, 08:01 AM
|
#10
|
|
Senior Member
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
|
Depending on which model, its:
0221751 DOOR,ENTRANCE NEW WHITE 26X80 RADIUS SMOOTH L1000 RIGHT HAND BAUER LOCK WITH BLACK WINDOW GARNISH INTERIOR AND EXTERIOR/
is on :
· Jayco 2014 29KS E1MU Greyhawk Type C MH-->Jayco 2014 29KS E1MU Exterior Doors
· Jayco 2014 31DS E1MT Greyhawk Type C MH-->Jayco 2014 31DS E1MT Exterior Doors
· Jayco 2014 31FK E1MC Greyhawk Type C MH-->Jayco 2014 31FK E1MC Exterior Doors
· Jayco 2014 31FS E1ML Greyhawk Type C MH-->Jayco 2014 31FS E1ML Exterior Doors
· Jayco 2014 31SS E1MJ Greyhawk Type C MH-->Jayco 2014 31SS E1MJ Exterior Doors
or
0235556 DOOR,ENTRANCE CHAMPAGNE 26X80 RADIUS T60 RIGHT HINGE BAUER LOCK WITH BLACK WINDOW GARNISH INSIDE AND OUT SIDE WITH TOUCH
is on:
· Jayco 2014 29KS E1MU Greyhawk Type C MH-->Jayco 2014 29KS E1MU Exterior Doors
· Jayco 2014 29MV E1MV Greyhawk Type C MH-->Jayco 2014 29MV E1MV Exterior Doors
· Jayco 2014 31DS E1MT Greyhawk Type C MH-->Jayco 2014 31DS E1MT Exterior Doors
· Jayco 2014 31FK E1MC Greyhawk Type C MH-->Jayco 2014 31FK E1MC Exterior Doors
· Jayco 2014 31FS E1ML Greyhawk Type C MH-->Jayco 2014 31FS E1ML Exterior Doors
· Jayco 2014 31SS E1MJ Greyhawk Type C MH-->Jayco 2014 31SS E1MJ Exterior Doors
Either case, the build to was a Bauer lock. I can call Jayco and see if they can send a manual if you like. Just let me know.
John
|
|
|
|
|
02-25-2014, 07:52 AM
|
#11
|
|
Junior Member
Join Date: Jan 2014
Location: Escondido, CA
Posts: 10
|
John-
Thanks…. We have the White 31DS. it does not have the keypad attached to the actuator as in the Bauer. It appears to be the Dexter system. Brian sent a PDF file to me and I'm about 99% sure that's it.
Gary
|
|
|
|
|
02-28-2014, 07:42 PM
|
#12
|
|
Junior Member
Join Date: Oct 2012
Posts: 2
|
Sorry for my delayed response. Work is nuts. I am headed out to my rig tomorrow so if you need me to send you the instructions I have, I would be happy to forward to you.
|
|
|
|
|
03-01-2014, 10:50 PM
|
#13
|
|
Senior Member
Join Date: Jul 2013
Location: Renton
Posts: 517
|
We have a 2014 Greyhawk 31FS. You do have to short a wire to get the lock into programming mode so you an set the door lock code. It is supposed to be done by the dealer at delivery as a part of the delivery experience. Our dealer didn't do it and I nattered at them and they did it for me. I wasn't about to disassemble the door lock on my brand new Greyhawk. I have the manual that says how to program the keypad if the other people on this thread can't find their manual I will look for mine.
__________________
Michael
Old setup:
2004 Chevrolet Silverado 3500 LT with a 2004 Jayco JayFlight 29BHS
2014 Greyhawk 31FS with a 2007 Tahoe toad
New setup:
2014 Thor Palazzo 33.3 with a 2017 Ford Explorer toad
|
|
|
|
|
03-25-2014, 10:41 AM
|
#14
|
|
Senior Member
Join Date: Feb 2013
Location: Moses Lake
Posts: 296
|
When I bought mine the dealer asked me what I wanted to use for a code and they programed it. I assume it wasn't difficult, as I believe the salesman did it himself. Now that it's set I don't have a need to change it and didn't ask them how they did. But I would think a Jayco dealer could walk you through the process.
|
|
|
|
|
03-25-2014, 11:16 AM
|
#15
|
|
Senior Member
Join Date: Nov 2013
Location: north az
Posts: 305
|
Go to www.dexterdoor.com and follow directions to download keyless entry door w/keypad consumer manual. No problem with this.
|
|
|
|
|
10-06-2019, 08:19 PM
|
#16
|
|
Junior Member
Join Date: Oct 2019
Location: Snohomish
Posts: 2
|
Do you still have the manual for the Dexter Door Keyless Entry System. The Service manual part number is: VD051000. I have a 2013 Greyhawk 31FS. The DexterDoor website is no longer active. Contact me by PM for email address. Thank you.
|
|
|
|
|
10-06-2019, 09:38 PM
|
#17
|
|
Junior Member
Join Date: Jul 2018
Location: Stevensville
Posts: 24
|
Keyless entry
Your lock is probably a Trimark 540-0100 or 540-0125. That is what I have on my 2014 Greyhawk 31FK. You will have to remove keypad from door and ground the extra wire, wait for beeps, push buttons for new authority code. Then put in new acces code. Instructions are easy to get online at e-ask.
|
|
|
|
|
10-07-2019, 07:32 AM
|
#18
|
|
Senior Member
Join Date: Oct 2018
Location: MATTAPOISETT
Posts: 233
|
Quote:
Originally Posted by @K6GAD
Does anyone know the manufacturer of the Greyhawk keyless entry lock. We didn't get any info on how to change the five digit code. Did a search and entries seem to be for trailers. Tried the suggested procedure but no luck.
Gary
|
I believe if you take the cover off in the inside there are direction on a sticker on how to do it. There is a sticker on our 2018 Greyhawk.
|
|
|
|
|
10-07-2019, 11:17 AM
|
#19
|
|
Senior Member
Join Date: May 2017
Location: Kingman
Posts: 620
|
Quote:
Originally Posted by @K6GAD
Does anyone know the manufacturer of the Greyhawk keyless entry lock. We didn't get any info on how to change the five digit code. Did a search and entries seem to be for trailers. Tried the suggested procedure but no luck.
Gary
|
Unscrew the battery cover. The instructions are on the underside of the battery cover.
|
|
|
|
|
10-07-2019, 11:48 AM
|
#20
|
|
Senior Member
Join Date: Jul 2014
Location: Fuquay-Varina
Posts: 884
|
This is how I changed the default code on the lock on our 2014 Greyhawk 31FK:
According to the documentation that came with mine the factory authorization code is 77777 and the factory access code is 12345. You hold the 5/6 button for 3 or 5 seconds until you hear two beeps. Then you enter 77777 and then you can change your access code.
They recommend that you change the authorization code as well but you have to take it out and strip a wire and ground it for a few seconds to change that code.
There is a yellow wire you short with the black wire until you hear a beep like the manual says. When you change the authorization code you can use that as an access code to unlock the door, I then put an access code in as well for others.
__________________
2014 Greyhawk 31FK
2007 Honda Shadow Sabre 1100cc
|
|
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
