Just an FYI to those that have had cable tv reception issues.
In getting back to basics I started looking for reason I could scan for Cable channels and never get results. I started at the wrong end-The TV end. When I looked at the cable end, the connection inside the compartment on Drivers side where the 30 AMP cable is stored also, I found on the backside of panel where RG6 cable attaches is another connector that goes inside coach. The cable was pulled out of connector (More than likely while I was putting my 30 AMP cable back into compartment). A simple recrimp of cable to connector and rescan-138 channels found!
Even though I take the blame for this episode-This is poor design at best.
I recommend relocate the cable coax connection somewhere it can not be damaged by necessary storage of other cable.