inverter

[greyhawktom]

I have 2015 31 fk with a xantrex pro inverter 1000.
It powers up and if the tv has power when it its on, but when i start the engine and put it in drive I lose power to the tv.
Is this normal?

I thought the purpose of an inverter was to have the tv on when traveling.

any help would be appreciated.

[Grumpy]

Discussed many many times

https://www.jaycoowners.com/forums/f...-on-11021.html

[Robbbyr]

Originally Posted by greyhawktom

I have 2015 31 fk with a xantrex pro inverter 1000.
It powers up and if the tv has power when it its on, but when i start the engine and put it in drive I lose power to the tv.
Is this normal?

I thought the purpose of an inverter was to have the tv on when traveling.

any help would be appreciated.

Jayco installs a relay to cutoff the front TV outlet when engine is running. Many have disabled it, a very simple fix done by cutting the 12-volt feed wire to the outlet's relay.

[greyhawktom]

where is the relay?

and should the back tv have power? because it doesnt at anytime when power is off and the inverter is on.
thanks for the reply

[Grumpy]

Originally Posted by greyhawktom

where is the relay?

and should the back tv have power? because it doesnt at anytime when power is off and the inverter is on.
thanks for the reply

It's pictured in the posts that I linked, along with how to disable it. No to the back TV.

[greyhawktom]

thanks grumpy,
I finally noticed your link.
I will give it a try.

[pconroy]

what Grumpy said - our back bedroom TV is not on the inverter. The only outlet in our 31FK on the inverter is behind the main TV.