 |
03-25-2020, 04:49 PM
|
#1
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Inverter location - 2014 Jayco Greyhawk
Can you help me locate the Xantrex Pro XM1000 Inverter on my 2014 Jayco Greyhawk 31FS? It keeps indicating an Error E05. I have removed all loads on the 1 outlet and tried resetting it but nothing helps. I plan to replace it if I can find it. I have checked throughout the rig including inside and outside but can't find it. The control panel is just inside the front door and it only has the remote cover from the unit.
I did locate an electrical device under the rig about 3 feet from the Onan generator and 3 feet from the battery box. I wonder if this is the converter though. It is rather large being about 10 inches wide and 15-18 inches long.
Any help that you can give is greatly appreciated.
Thanks,
Sam
|
|
|
|
03-25-2020, 04:54 PM
|
#2
|
|
Senior Member
Join Date: Apr 2016
Location: Morganton
Posts: 724
|
I do not know about yours but mine is under the bed
|
|
|
|
|
03-25-2020, 04:55 PM
|
#3
|
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,071
|
Here's what it looks like.. Many have said it is under the bed.
https://www.amazon.com/Xantrex-Power.../dp/B00197RUUQ
__________________
 DISNEY LOVERS
|
|
|
|
|
03-25-2020, 05:09 PM
|
#4
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Inverter location - 2014 Jayco Greyhawk
Great! Thanks! My rig is still buttoned up for winter in CO and I tried looking under the bed from the outside compartment door. I didn't see it from there but I need to lift up the mattress and board under the bed to check it from that angle. There may be a compartment behind the fuse box that I can't see from underneath.
I will check it tomorrow. Have you tried replacing one of these? If not too complex, I will do myself.
Thanks,
Sam
|
|
|
|
|
03-25-2020, 05:28 PM
|
#5
|
|
Senior Member
Join Date: Jun 2018
Location: Eastpoint, Fl.
Posts: 338
|
Sam, see the picture of my 16 Greyhawk. It may help you locate your inverter.
Hope this helps, Jimmyd
|
|
|
|
|
03-25-2020, 06:13 PM
|
#6
|
|
Senior Member
Join Date: Jun 2016
Location: Denver
Posts: 4,240
|
2016 31FK here, not an FS.
Under the bed, as others have said.
__________________
2016 Greyhawk 31FK
|
|
|
|
|
03-25-2020, 07:45 PM
|
#7
|
|
Senior Member
Join Date: Apr 2016
Location: Morganton
Posts: 724
|
after you lift the bed up a wood box on the back has all the goodies and the rat nest wiring
|
|
|
|
|
03-26-2020, 07:09 AM
|
#8
|
|
Senior Member
Join Date: Dec 2016
Location: INDIANAPOLIS
Posts: 310
|
Quote:
Originally Posted by Jimmyd
Sam, see the picture of my 16 Greyhawk. It may help you locate your inverter.
Hope this helps, Jimmyd
|
Just so you know what you're looking at in this picture, the inverter is on the left, charge converter in the middle mounted to the wall land the Automatic Transfer Switch is on the right. If you need to replace yours, I actually have a Xantrex XM1000 and XM1800 sitting in my garage available to sell since I upgraded my inverter (twice). These both work well!
__________________
2016 Alante 31v
|
|
|
|
|
03-26-2020, 10:04 AM
|
#9
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Outstanding picture! Thank you for doing this! I will hook up my batteries today and do a dive under the bed!
|
|
|
|
|
03-26-2020, 10:10 AM
|
#10
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Excellent! I may take you up on the offer. I seem to recall that I read that the Xantrex 1000 has a fuse built in and I want to check it before I replace it.
|
|
|
|
|
03-26-2020, 01:07 PM
|
#11
|
|
Senior Member
Join Date: Jul 2017
Location: New Freedom, PA
Posts: 791
|
While you're looking at that wiring mess under the bed, check the spray-foam around the wires coming up through the floor.
My foam was incomplete and I had a mouse or two come up through that hole and build a mouse nest in the rats nest.
.
__________________
Ron K3HIL Amateur Extra
Retired
2016 Greyhawk 29MV
2000 Jeep Sahara
"Any advice I give or facts I present are valid to the best of my knowledge,
but I am not responsible if you follow it and you **** your **** up."
|
|
|
|
|
03-27-2020, 03:01 PM
|
#12
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Allen: Greetings. I located the inverter, etc. under the foot of the bed. Whew! I believe that I can swap it out for another one. I would like to talk with you about the 2 you have. Let's switch over to our email addresses. You can reach me at gsamfoster@yahoo.com.
Thanks, Sam
|
|
|
|
|
03-27-2020, 03:02 PM
|
#13
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
The previous message was for Allen C.
Sam
|
|
|
|
|
03-27-2020, 08:08 PM
|
#14
|
|
Senior Member
Join Date: Apr 2016
Location: Morganton
Posts: 724
|
yes I had a mouse nest in the rats nest and a lot of mud daubers till I plugged it with steel wool
|
|
|
|
|
03-28-2020, 10:23 AM
|
#15
|
|
Lost in the Woods
Join Date: Apr 2019
Location: Ocean County
Posts: 2,807
|
Quote:
Originally Posted by Grumpy
|
Is that the actual one that Jayco installs? The specs says it's a modified sine wave, not a pure sine wave inverter.
|
|
|
|
|
03-30-2020, 04:07 PM
|
#16
|
|
Junior Member
Join Date: Sep 2017
Location: Durango
Posts: 11
|
Allen: Greetings. I received your reply via my email a few days ago but now I can't find it. I do want to follow up with you on it. Please resend your email to me.
Thanks,
Sam
|
|
|
|
|
03-30-2020, 08:22 PM
|
#17
|
|
Senior Member
Join Date: Jun 2016
Location: Denver
Posts: 4,240
|
Quote:
Originally Posted by RetiredOne
Is that the actual one that Jayco installs? The specs says it's a modified sine wave, not a pure sine wave inverter.
|
it's the one in my 2016.
__________________
2016 Greyhawk 31FK
|
|
|
|
|
03-30-2020, 08:26 PM
|
#18
|
|
Senior Member
Join Date: Dec 2016
Location: INDIANAPOLIS
Posts: 310
|
Quote:
Originally Posted by pconroy
it's the one in my 2016.
|
And it's the one in originally my 2016 Alante.
__________________
2016 Alante 31v
|
|
|
|
|
04-04-2020, 03:58 PM
|
#19
|
|
Senior Member
Join Date: Dec 2015
Location: Murrieta
Posts: 690
|
Quote:
Originally Posted by Jimmyd
Sam, see the picture of my 16 Greyhawk. It may help you locate your inverter.
Hope this helps, Jimmyd
|
Not your fault but, I hope that was the wiring techs first day on the job.
Absolutely no excuse or reason for a mess like that. That's the RV industry today I'm afraid.
|
|
|
|
|
04-05-2020, 07:31 AM
|
#20
|
|
Senior Member
Join Date: Jul 2017
Location: New Freedom, PA
Posts: 791
|
Quote:
Originally Posted by Jimmyd
Sam, see the picture of my 16 Greyhawk. It may help you locate your inverter.
Hope this helps, Jimmyd
|
Quote:
Originally Posted by Wireman
Not your fault but, I hope that was the wiring techs first day on the job.
Absolutely no excuse or reason for a mess like that. That's the RV industry today I'm afraid.
|
.
My 2016 Greyhawk 29MV wiring looks just like that.
.
__________________
Ron K3HIL Amateur Extra
Retired
2016 Greyhawk 29MV
2000 Jeep Sahara
"Any advice I give or facts I present are valid to the best of my knowledge,
but I am not responsible if you follow it and you **** your **** up."
|
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
