I hope you did not get the main control board wet... If it were mine - I would pull the power for the furnace and let it dry out over a few days - then reconnect to see if the water caused permanent damage, or you need to replace it. Warranty would not cover it if it was caused by misuse (they will call getting the board wet from washing the rig just that)
In the meantime, get the ID numbers off the board and start shopping around for a replacement, they are not that hard to swap out if the one you have proves bad...
__________________
Steve & Stacy with Jasper (Australian Cattle dog)
2015 Seneca 36FK
Custom 27' flatbed trailer hauling:
07 Toyota FJC & Yamaha Kodiak 400 ATV
|