Quote:
Originally Posted by t18skyguy
Glad you got it resolved. I find it interesting as I'm not totally confident with the weld job on the bracket of my 2017 Greyhawk. They just took two pieces of angle bracket and welded them into an L shape with no fillet piece at the angle of the L . The weld looks OK, it's just not the way I would do it, and am thinking of reinforcing it.
|
I would. A nickles worth of metal sure could save you a big headache down the road. Mine ripped up hydraulic lines and the wiring harness. After replacing the pump, they also had to replace some circuit boards on the leveling system inside because the new pump wasn't compatible with the old boards. It was a tremendous hassle that could have easily been prevented.