It's probably the same as mine. Just a bracket that sticks out from the cabinet, with a little plunger on the door. Rubber piece on door slides into rubber grommet on the bracket. The family has been trained to be careful with that because it is quite fragile IMO.
Something a little like this, but with the receiver end on a small bracket because there's no flat place to mount it where the piece on the door will go into it:
I'm just going off memory, camper is in storage.
I do remember having the dealer fix it during my PDI because it wasn't lined up right. Dealer just put a small shim behind the wall-mounted bracket so it would line up with the plunger on the door.
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)