Lippert leveling

[billjmck]

Just pulled into an RV park and can not get the system to even turn on. Breakers and fuses are good, unless there is something besides at the end of bed. Parking brake on and engine running. What am I missing?

[Frodo13056]

I just responded to another poster that has a similar issue: My bet is that the ground cable that attaches to the hydraulic pump / reservoir has detached. I’m pretty sure that you have the LCI levelers and if you do, then you should know that there is a significant issue with how the hydraulic pump / reservoir is attached to your motorhome frame. You’ll have to look under your coach to find the pump / reservoir and there is a black cable that attaches the the base of the pump that is supposed to attach to the frame.

[billjmck]

Thanks will check.

[pconroy]

Mine was the ground wire too.
Frodo described it perfectly.


If you want to double check - then grab a jumper cable and connect the ground lug directly to the negative terminal on the battery. Once I did that, things started working. I knew it was a ground issue.


Took everything off the bolt, cleaned it all up and reassembled,

[billjmck]

It was the ground wire. The terminal fitting was broke on the pump. Maintenance guys here at the camp found a small one and I got it on enough to make it work.
Will stop during travels today and find proper fitting. Thanks to both of you for the pointer.
Bill