Mounting Bedroom TV in Jayco Melbourne Prestige 24L...or any other model

[bbjohnson]

I appreciate you sharing your experience. Thanks!

[CalvinD49]

We just purchased a 2018 34RSBS that has a TV mounting location in the bedroom. The service tech told us that the mounting boards behind the wall is 12” x 12” and you should use screws no longer than 3/4”.
I have not mounted a bracket or tv as of yet.

[fshrmndave]

I installed a LG 24" flat screen in the bedroom of my Jayco using a MST16B-B1
SANUS MST16B-B1 SMALL TILT TV. I used 1 1/2" long by 3/8" diameter lag screws. But beware I had my doubts about the location of the small 1"x 2" stud that was supposed to be behind the sticker so I used a stud finder and sure enough the sticker was off by a good 2 to 3 inches.

[daveobieone]

Earlier this summer, we installed a 24 inch Element flat TV from Walmart in the bedroom of our Eagle HT. It was like $100, but it looks and receives very well.

I used an adjustable mount I got from Harbor Freight. It worked just great. I think it was under $20.

Mine also had the sticker on the wall...it seemed to be just about in the right location. I could push around on the wall and feel it pretty plainly.

I used 1 inch screws. The TV mounting plate was fairly thick, so there was a little less than an inch of screw in the wall. No problems with the tip of the screw coming through the outside of the Eagle, but I wouldn't use anything longer!

After considerable bouncing around this summer, it still seems quite solid.

[larryrebos]

I reinforced the cabinet and mounted a swing arm in the drivers side corner so we can watch from the bed or table. it's a smart TV so we can stream amazon Prime videos from my phone and mirror to the TV
Toyota Tacoma W/ 4wd and tow pkg
195 RB