|
09-28-2022, 09:19 AM
|
#1
|
Junior Member
Join Date: Apr 2022
Location: Hurst
Posts: 16
|
Norcold 8x 2 way
Electric was working in yard on shore power working fine on generator going down road first stop noticed temp in reefer rising no codes green light got where we were going and switched to propane operation cools back down
Now we have switched back to shore power and green light no codes but temp is rising so back to propane
When we break camp have 8 hr trip home
Don’t want to lose all the food and don’t want to run the generator for nothing if the electric mode doesn’t work
Is it possible and safe to run gas mode while rolling
|
|
|
09-28-2022, 10:25 AM
|
#2
|
Senior Member
Join Date: Apr 2021
Location: Chino
Posts: 323
|
Check your breaker or fuses. Also maybe see if the GFCI outlet is tripped in the bathroom. I had a similar issue where electric power wasn't getting to the refrig.
|
|
|
09-28-2022, 11:23 AM
|
#3
|
Junior Member
Join Date: Apr 2022
Location: Hurst
Posts: 16
|
Reefer operation
Can the norcold nx8 be run in gas mode while traveling down the highway
|
|
|
09-28-2022, 11:54 AM
|
#4
|
Junior Member
Join Date: Apr 2022
Location: Hurst
Posts: 16
|
Fuse good Brkr set power panel shows 3 amps when I put it in ac automatic mode thanks for the response
|
|
|
09-28-2022, 12:03 PM
|
#5
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,780
|
Yes, you can!
Beware there are some areas that do have restriction if the propane tank can be open or not. Such as some tunnels, ferries and gas stations. Check your state ordinances. All states to my knowledge do allow you to travel with the tank open and the frig on.
|
|
|
09-29-2022, 01:58 PM
|
#6
|
Senior Member
Join Date: Mar 2019
Location: Madison
Posts: 341
|
Quote:
Originally Posted by RODBURNS
Electric was working in yard on shore power working fine on generator going down road first stop noticed temp in reefer rising no codes green light got where we were going and switched to propane operation cools back down
Now we have switched back to shore power and green light no codes but temp is rising so back to propane
When we break camp have 8 hr trip home
Don’t want to lose all the food and don’t want to run the generator for nothing if the electric mode doesn’t work
Is it possible and safe to run gas mode while rolling
|
The fridge is made to run while driving. You have the exact symptoms that I have on my NX8. I even had the cooling unit replaced after they took a thousand measurements to determine if it was installed correctly. Still to this day it will not cool well on electric. If it is hot out or you open the door its going to run between 55-60 degrees and must be switched over to gas. I don't believe that there is a solution to this junk. I am guessing that is why people are ripping them out and installing residential units.
__________________
2019 Redhawk 24B
|
|
|
09-29-2022, 02:05 PM
|
#7
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,780
|
Quote:
Originally Posted by drmike961
The fridge is made to run while driving. You have the exact symptoms that I have on my NX8. I even had the cooling unit replaced after they took a thousand measurements to determine if it was installed correctly. Still to this day it will not cool well on electric. If it is hot out or you open the door its going to run between 55-60 degrees and must be switched over to gas. I don't believe that there is a solution to this junk. I am guessing that is why people are ripping them out and installing residential units.
|
Not sure what Norcold I have. But we had issues with temp control when our TT was new. Totally fixed the issue with adding a couple small fans in the frig that are attached to the coil. Our frig temp is now rock solid no matter what.
This is not the fan we have, but it is the same concept. I ran a light gauge wire through the condensate drain to power it, and tied it into the 12V power source for the frig. When the fan is attached to the coil it completes the circuit and runs. It also turns off automatically if we turn the frig off.
https://www.amazon.com/Deluxe-RV-Ref...%2C154&sr=8-16
|
|
|
10-02-2022, 11:03 PM
|
#8
|
Member
Join Date: Aug 2022
Location: Scottsdale
Posts: 56
|
Jagiven - so with this fan does the fridge stay cold on electric? Or only on propane? Thanks, Dmarcian
|
|
|
10-05-2022, 05:19 AM
|
#9
|
Senior Member
Join Date: Sep 2014
Location: In a house
Posts: 1,000
|
Quote:
Originally Posted by Dmarcian
Jagiven - so with this fan does the fridge stay cold on electric? Or only on propane? Thanks, Dmarcian
|
Reads like it only is cold when running on propane. Seems like a lot of fridges that RV's use with 12V capability do not cool well using 12V.
Is it because 12V cannot heat well? My understanding is that heat is how the fridge creates cold air.
__________________
2005 Jayco GreyHawk Class C
2007 Ford F150
|
|
|
10-08-2022, 08:05 PM
|
#10
|
Senior Member
Join Date: Oct 2018
Location: Out there somewhere
Posts: 1,620
|
We also have same type of issues as you do with our NX8! After 3 rigs with absorption refrigerators I’m done!. My solution; I just ordered a 12V GE compressor fridge! Install to be done in about 2 weeks. The GE is a tight fit, it’s 9.8 C’ and an 1/8 wider than our cutout, height and depth are no issue. I plan on wiring it straight to my battery with a separate on/off switch so if I’m not connected to shore power I can just run the fridge the night before departure off my battery. I have 200W of solar that’s really not being utilized, but now it will be! Get rid of that 3 way, their to finicky!
|
|
|
10-08-2022, 09:14 PM
|
#11
|
Senior Member
Join Date: May 2022
Location: CLOVIS
Posts: 293
|
This is interesting. I have a 25-year-old Norco 3-way that is still working superbly, whether on shore power or gas. I have only had the rig since June so haven't yet run it on battery and don't plan to. Sounds like the new, fancy, rigs are filled with crap. Sure am glad I did not buy new.
__________________
1997 Eagle 222.
2006 Mazda MX-5 Toad.
2016 Nissan Quest. For hauling the grandkids.
Main purpose of Jayco is for camping at racetracks.
I am a volunteer corner worker for Sports Car Club of America.
|
|
|
10-09-2022, 07:03 AM
|
#12
|
Senior Member
Join Date: Oct 2018
Location: Out there somewhere
Posts: 1,620
|
Quote:
Originally Posted by SmokeyBear
This is interesting. I have a 25-year-old Norco 3-way that is still working superbly, whether on shore power or gas. I have only had the rig since June so haven't yet run it on battery and don't plan to. Sounds like the new, fancy, rigs are filled with crap. Sure am glad I did not buy new.
|
Yup, anything new seems to be either assembled poorly, with lack of care or pride. Then there is the material shortage/supply issue. Build it as cheap as possible, then raise the cost overall because there is a great excuse to !
I Almost forgot! Back it up with terrible or non existing customer service!
|
|
|
10-09-2022, 09:24 PM
|
#13
|
Junior Member
Join Date: Mar 2019
Location: Rockford
Posts: 27
|
I just replaced the board on my 2019 Norcold.. AC quit but the gas was fine. Now I have a spare gas only board.
|
|
|
10-10-2022, 03:47 PM
|
#14
|
Senior Member
Join Date: Feb 2020
Location: Seekonk
Posts: 191
|
So I just finished installing the inside fan I picked up from Amazon and mentioned here, now I'd like to set up an external fan. I'd like to mount it in the control panel area with the fan pointing up. It looks like I have a spot that a fan with (about) a 5 inch square mount and 1 inch or so thick would work. My question is what cfm fan should I use.
My refer is a Norcold N8X in my 26XD class C. If someone has a part number for a fan they are satisfied with or any other suggestions I would appreciate the advise.
Oh are those holes drilled into sheet metal where the controls are used for mounting/holding with #8 or #10 sheet metal screws? If so they might come in handy for setting up the fan.
__________________
|
|
|
10-10-2022, 04:14 PM
|
#15
|
Senior Member
Join Date: Oct 2018
Location: Out there somewhere
Posts: 1,620
|
I used 3- 12V 3D printer fans. I took apart binder clips, drilled holes in them and mounted them to the fans with long nuts & bolts. The binder clip pinch on to the fins and hold nicely. They are also very easy to move and replace. WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turb... https://a.co/d/g63uUpy
On the roof I used 2-12V
Coolerguys 120MM (120X120X25) High Airflow Waterproof IP67 12v Fan https://a.co/d/7f4hI2X
All on switches ran back to the coach cutoff solenoid with in-line fuses.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|