Hi, I’m new to this forum; I purchased my greyhawk prestige 2020 in August 2020. My refrigerator has been unreliable and is now not working on ac power. It works on propane but I want it to work on ac power.
Gaby
Follow the 110 power cord to the control module and see if it came loose at the module. My 2014 did the same thing. In plugged it and plugged it back in and it’s been working fine since then. Good luck.
My 2020 Melbourne probably has the same Norcold. I had a similar problem….Automatic mode would work with propane when parked, and was smart enough to switch to battery when driving. But switching to AC when connected to shore power didn’t work (error 10). I reset the breakers (not tripped but I flipped them off and on) and now it works. I probably didn’t need to switch them all but the factory labelling is pretty poor and there is only 6 breakers. :-)
Linear Mode
