I had the noise and lots of other issues. Depending on if your chassis was stretched and the amount, the driveshaft noise (they ALL have noise) will be more pronounced. Mine was loud starting around 62 and going away above 67mph. You can try the carrier bearing shims, though sometimes you can make it worse. The bearings do not have locating pins and you can easily misalign it.
Some of the welded pieces in the center from other rigs I have gotten under appear to have poor quality control with regard to the angle and position of the center support structure.
When I took the rig down to LW Enginering that stretched the chassis, they reset the angles (even installed an angled shim) and ended up installing a foam filled driveshaft. It fixed most of the noise. Still other problems present.
As far as I can tell from their "engineering" teams, they have done no NVH analysis on how the mods are affecting the chassis performance and YMMV.
2021 Entegra Odyssey 31F
2015 Jeep Wrangler Unlimited
Ready Brute Elite Tow Bar