Remove the screws on the lower edge. Don’t worry about the ones on the storage tray they only hold the tray on. Remove the large bolts on the handle these use 50 Torx I think. The door release lever can be removed there is a screw on the back side or you can leave it on and work the panel off it. The panel is now held on by about 6 door panel retaining clips. I then used a flat driver to pop the pins. I broke several and will have to replace but they are pretty cheap.
The last two items are the lock and the electrical. The lock has a little pin in it. To release pull it up and forward then the panel should be free. Remove the electric connector. Once you have done it once the next panel comes off in less than two minutes.
I added sound deadening to the door and will be doing the other door when the weather warms up.
Linear Mode
