I saw another thread about this but cannot find it now. So I am posting these photos and description for those out there who are having this problem
My inside step treads were splitters my and looked pretty bad as you can see. I cut the edge away and used only the rubber tread material. Yes found a stair nosing at Lowe’s. A 48” section for $14.00. Cut to length and held down with three countersunk screws.
Sorry about the sideways photos. Doing this on my phone and can’t figure out how to rotate them
I installed gritted safety tape on the edges of the entry steps and the top landing to prevent slipping. I slipped off one of the step edges and fell once.
__________________
Rick with Lori and Two Pekes
'16 Jayco Seneca HJ Topaz
'13 Mini Cooper toad : Blackhawk All-Terrain tether