I am guessing this is on a Seneca? If so, the there are torx screws the hold on the dash face, remove them all and depending on the year, the air brake knob has a pin to remove it on early years and 2018.5 and late unscrew. Then the woodgrained panels usually have a couple screws holding them in place, remove them and the panel is free to gently pull out. Then unplug the wiring from the switch and pop the switch out. Reinstall in reverse order. Sound like a lot but should only take about 10-15 minutes.
Brian & Jeannie
2018.5 Seneca 37RB with to many mods to list
2015 Jeep JKU Rubicon