Scan Gauge

Fishman417 · 09-12-2019, 12:43 PM

Looking at purchasing a Scan Gauge for our 2016 Seneca with a Cummins engine. Anyone use one? Recommendations?

Vicr · 09-12-2019, 01:30 PM

I've had one for about two years installed on my dash to the left of my steering wheel for easy reading and changing menus. It's really helpful in watching MPG's and changing driving habits for better MPG's. That alone will make it pay for itself.

Rustynuts · 09-12-2019, 01:40 PM

I have had one on every RV and our Current Seneca. I mainly like it for the real time gauges instead of the dash gauges which really dont tell you anything other than you are "OK" Watching the SG you can see how the temp and pressure fluctuate yet the dash gauge never moves. You also can have a trans temp gauge and be able to read codes and clear them. I have mine mounted in the cubby above the driver seat which is easy to glance up at while driving. I also highly suggest ordering direct through Scangauge as you will get the correct cord AND a unit with the latest firmware loaded on it.....both issues I had to deal with when I ordered from Amazon. Right now it is only $2 more to order direct.