|
09-21-2017, 07:10 PM
|
#1
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Seneca - radio or cb antenna
Is the antenna on the driver's mirror a cb antenna or a radio antenna ?
I was told it was a cb antenna and was premiered for a cb by the dealer but the only antenna wire I'm finding in the dash goes to the radio.
-
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
09-21-2017, 07:16 PM
|
#2
|
Senior Member
Join Date: Dec 2014
Location: Akron
Posts: 3,207
|
Quote:
Originally Posted by MD3
Is the antenna on the driver's mirror a cb antenna or a radio antenna ?
I was told it was a cb antenna and was premiered for a cb by the dealer but the only antenna wire I'm finding in the dash goes to the radio.
-
|
Hopefully a newer Seneca owner can help. My 2014 antenna is dual-purpose, I have a multiplexer box behind my dash with a CB antenna output connection. But I think it is different for the newer units.
__________________
Rob R.
Akron, OH
2014 Seneca 37TS
Toads: 2019 Ford Edge ST or 2013 Ford Focus ST
|
|
|
09-22-2017, 04:26 PM
|
#3
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Received an email from Jayco.
NO cb wiring in my Seneca. Have to install everything.
Now to figure out how hard it would be to duplicate the driver's side radio antenna with a cb antenna.....
-
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
09-24-2017, 03:20 PM
|
#4
|
Senior Member
Join Date: Aug 2015
Location: Lafayette
Posts: 254
|
Amazon: https://www.amazon.com/AM-FM-CB-Ante.../dp/B0045J9Z3K
This is basically what they've done in our 2014 Jayco Seneca. Looks for my posts, pictures, etc. It is a compromise at best.
Welcome aboard!
__________________
Terry
N5QWA
2014 Jayco Seneca 37FS
|
|
|
09-24-2017, 09:35 PM
|
#5
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Quote:
Originally Posted by tjbroussard
|
Does this compromise work very well ?
What is the limiting factor on a setup like that ?
I haven't had good luck with CB range in the past in other vehicles, even after taking it in to a professional cb shop.
-
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
09-25-2017, 03:46 AM
|
#6
|
Senior Member
Join Date: Aug 2015
Location: Lafayette
Posts: 254
|
Ive never been pleased with mine and no longer use the CB I bought for the RV. I think it would be best to try an entirely separate antenna. I did that to the passenger side antenna, but found CB just wasn't working well at all for me.
__________________
Terry
N5QWA
2014 Jayco Seneca 37FS
|
|
|
09-25-2017, 10:11 AM
|
#7
|
Senior Member
Join Date: Dec 2015
Location: Houston
Posts: 174
|
MD3, it's not hard at all. I spent 2 hours looking for that splitter on the driver side antenna to discover that it does not have it in 2017. Mounted a longer whip 3' on the passenger side and ran the coax through the door and dash. Works well.
|
|
|
10-23-2017, 03:37 PM
|
#8
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Anyone have a link to the cb antenna mount/bracket on the driver's side ?
I'm looking to duplicate the radio antenna mount on the driver's side so both sides will be he same antenna setup .... just one is radio and the other side cb.
I've found complete mirror mounting arms but I'd rather just buy the antenna mount if it is available....
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
10-24-2017, 04:08 AM
|
#9
|
Senior Member
Join Date: Aug 2015
Location: Lafayette
Posts: 254
|
Quote:
Originally Posted by MD3
Anyone have a link to the cb antenna mount/bracket on the driver's side ?
I'm looking to duplicate the radio antenna mount on the driver's side so both sides will be he same antenna setup .... just one is radio and the other side cb.
I've found complete mirror mounting arms but I'd rather just buy the antenna mount if it is available....
|
If you look at my posts, you'll see I made one using a regular mount. I snaked the coax through the original tube than into the door. Pretty easy, but disappointed in the efficiency of the mirror mounted antennas. I found the RF from my ham radios interfered with the control boxes in the interior cabinets.
__________________
Terry
N5QWA
2014 Jayco Seneca 37FS
|
|
|
10-24-2017, 06:25 AM
|
#10
|
Senior Member
Join Date: Jul 2015
Location: Southern Illinois
Posts: 880
|
Quote:
Originally Posted by tjbroussard
|
So, I'm wondering if removal of the splitter would improve the AM signal. I'm an AM radio junkey and it drives me nuts how bad the AM signal is with lots of engine noise and basically unusable. When stopped, I use the AM/FM radio in the outside TV compartment and ran a different antenna for it up through the refrigerator chimney and mounted a 12 inch rubber whip antenna on top of chimney cover. Works great! But sure would like AM to work going down the highway.
__________________
Smooth Sailing,
Ric and Jan Golding
Southern Illinois
2016 Jayco Seneca 37FS
2016 Chevrolet Traverse
2018 Cheverolet Silverado
|
|
|
10-25-2017, 04:04 AM
|
#11
|
Senior Member
Join Date: Aug 2015
Location: Lafayette
Posts: 254
|
Ric - Certainly worth a try. The splitter, along with a better antenna perhaps.
__________________
Terry
N5QWA
2014 Jayco Seneca 37FS
|
|
|
10-25-2017, 12:22 PM
|
#12
|
Senior Member
Join Date: Dec 2015
Location: Houston
Posts: 174
|
Go to rightchannel.com and they have the mirror mount and everything you need. The antenna needs to be higher than the cab over for it to work well.
Here is what you need:
FIRESTIK NGP 3-WAY MOUNT CB ANTENNA KIT with 4' antenna.
|
|
|
10-25-2017, 01:14 PM
|
#13
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
I've found the entire mirror mount arm with the wiring already plumbed through but I really only need the mint.
This mount is what I am looking for :
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
11-16-2017, 05:30 PM
|
#14
|
Senior Member
Join Date: Oct 2017
Location: Cypress
Posts: 120
|
It is a Freightliner part. I bought mine at Finditparts.
MEK-614090029 by FREIGHTLINER
|
|
|
11-16-2017, 11:39 PM
|
#15
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Quote:
Originally Posted by houstonstroker
It is a Freightliner part. I bought mine at Finditparts.
MEK-614090029 by FREIGHTLINER
|
Perfect, thank you !!
I just ordered one.
It doesn't show any pics online but hopefully this is the perfect match to the right side.
_
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
11-17-2017, 06:44 AM
|
#16
|
Senior Member
Join Date: Jul 2015
Location: Southern Illinois
Posts: 880
|
Thank you for all the info. Now I've got another project to add to my list.
__________________
Smooth Sailing,
Ric and Jan Golding
Southern Illinois
2016 Jayco Seneca 37FS
2016 Chevrolet Traverse
2018 Cheverolet Silverado
|
|
|
11-20-2017, 05:51 PM
|
#17
|
Senior Member
Join Date: Sep 2017
Location: Anaheim, CA
Posts: 408
|
Bracket came in today.... exact match.
Exactly what is was looking for. Thank you !!!
__________________
2018 Seneca 37RB
2005 LJ Rubicon - Sahara #90
2019 Can Am X3 XRS Max
2009 ATC enclosed trailer
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|