Seneca TV's

[mikew968]

I am trying to learn how to use the Seneca's TV's. I get a few channels thru the antenna but I am at a campground with cable. I attached the cable in the water/sewer compartment. I run the auto scan for cable and nothing!
What am I doing wrong?

[Grumpy]

Originally Posted by mikew968

I am trying to learn how to use the Seneca's TV's. I get a few channels thru the antenna but I am at a campground with cable. I attached the cable in the water/sewer compartment. I run the auto scan for cable and nothing!
What am I doing wrong?

Did you turn the antenna amplifier off?

[mikew968]

when i turn the amp off I get nothing

[mikew968]

OK I turned off the antenna and did the scan and now I have the cable channels it looks like. Only issue now is the quality is so bad you can't watch them!!!!

[Grumpy]

Did you re-scan with it off? If so then there is a wire that is not connected correctly. With the amp on you will not get any cable channels, it blocks the signal, only over the air channels come through.

[Grumpy]

Check you connections, that is usually caused by a loose wire.