Anyone have a good source to replace the sink cover/chopping block for a 2010 Greyhawk? Ours looks kinds used, one side is missing, so I thought it might be a nice time to replace.
Thanks in advance for the help.
__________________
Home: El Paso Texas
Jayco Grayhawk 31FS 2010
Do you have a router? With a template bit it is very easy to copy the old one or make a template out of cheap material then use it to cut your final product. If you have any shops that do solid surface countertops you can usually dumpster dive and find a scrap piece big enough or have them make you one. The few that are around me don't mind dumpster diving because they pay to have it removed by the pound or container.
I bought some for our previous 2011 TT. You will need the part number of your sink. The number is located on the under back side of sink. I took my cell phone and reached under there and snapped several photos to get the #
Here is the manufacturer of the sink:
Duo-Form Plastics
69836 Kraus Rd
Edwardsburg, MI 49112
Phone: 269-663-8525
Give them a call with your part # and they will give you a cost. Both sides of the boards plus shipping was $41.00 to Phoenix.
Hope this helps.
__________________
Joe and Mary Anne
1 20 yr old DD
2014 Ram 2500 Diesel Laramie Mega Cab 4 X 4
2011 Jayco Jay Flight 26RLS-Sold
2014 Jayco Eagle 298 RLDS
Linear Mode
