It's behind the left lower rear pull out drawer at the foot of the bed. Remove drawer from slides on either side using black tabs in the middle of either drawer slide, pull drawer all the way out, set drawer aside, look straight down in the hole with a flashlight. It's there. You can go through the manual adjustment using it with the 6 + 1 light flashes on the controller... Good luck with your slide out - mine is messed up right now. I think the full wall slide out in the 24B is undersigned for the load it's carrying. Not enough beef in the tracks to handle the full wall side we all have. That Schwintech slide mech. was a poor choice for that load I'm afraid. Tread lightly working with it or you'll join the club of 24B owners with messed up slide outs. See the other posts on this issue for the 24 B.
|